Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Finger Jointer

Automatic finger shaper for beams - details see: https://www.machineto.com/automatic-finger-shaper-for-beams-10341864

Characteristic

1.The machine integrates trimming,milling teeth,waste crushing and deburring and other functions into one,trimming,deburring,crushing device and cutting blades are directly fixed to the motor,the cutting position can be adjusted to ensure the verticality of cross-section.

2.The dual high-speed shaft for milling teeth can be adjusted up or down according to actual requirement;the high-speed spindles applies accurate dynamic balance and sealed oil bearings to ensure machining accuracy.

3.Workbench of the manchine adopts imported rails,bearings to make it run smoothly.Rail,bearing has long service life.

4.The timber clamping device,using clamping and pneumatic sensor detection,making it safe and reliable.

5.The workbench is driven by hydraulic cylinder,travel speed can be individually adjusted,the forward speed is adjusted by one-way throttle valva mainly based on cutting amount;the backward includes rapid return and delecration to smooth stop.Additional material supporting device moving with the workbench,the machine has features of high efficiency and low labor intensity.

Parameter

Model	MNT3525
Max working width	500mm
Working thickness	20-250
Min working length	250mm
Motor power of shaping	15kw*2
Shaper spindle dia	Φ70
Shaper spindle speed	6500rpm
Motor power for cutting-off	5.5kw
Cutting-off saw speed	2800rpm
Saw blade dia for cutting-off	Φ350
Scoring power	0.75kw
Scoring saw dia	Φ150
Scoring saw speed	2800rpm
Hydraulic system power	2.2kw
Hydraulic system pressure	1-3Mpa
Pressure of air system	0.6Mpa
Working table size	700*650mm
Weight	1600kg
Overall dimensions(L*W*H)	3292*1510*1595mm