Home  >  Printing Machinery  >  Printing Machinery Parts

1.Explosion Proof Viscosity Controller, 2.Roto-gravure&Flexo printing machine, 3.Big digital display, 4.Easily operate,clean - details see: https://www.machineto.com/automatic-explosion-proof-viscosity-controller-10073454

Automatic Explosion Proof Viscosity Controller

Automatic Explosion proof viscosity controller is designed for adjusting viscosity of ink or glue on printing industry. The operator only needs to set the right viscosity according to the products’ requirement. The pulse tester will automatically test the viscosity, and then the pneumatic double-diaphragm pump will circulate the ink or the glue. This Automatic Explosion proof viscosity controller is safe and reliable device. Its automatic viscosity tracking system maintains viscosity and color consistency.

Technical parameters:

Testing viscosity range	12-50s (No.3 Zahn Cup)
Voltage	AC 220V/110V
Power	15W
Dimension	760x350x280mm
N.W.	19KG
Circulation volume	2-6L/min.
Air pressure	4.0-8.0 Bars

Features:

1.Single unit machine can finish printing ink circulation, ink mixing, and ink viscosity control.

2.Improved product quality and color’s consistency.

3. Add solvent in time effectively reduced ink consumption by 15-20%, reduced printing cost.

4. Accurately control viscosity, so the workers can easily operate and have more time to focuses on others.

5. Using the frequency of pump (HZ) as control unit guarantee the viscosity accuracy. (Zahn Cup No. 3)

6. All the tube valves passed through by ink and solvent are controlled by air, more efficient, more reliable.

7.Cleaning requires only half gallon solvent and clean for one minute.

8. Using bigger digital display, operator can easily observe, set and adjust.

9.Automatic oil lubrication and recycling system extends pump life 3 times.

10.Ink tube was made by special material, no distortion, no intumescent.

11.Compact and lightweight machine is easily to be removed and install.

Working Principle:

This Automatic Explosion proof viscosity controller is controlled by sensing viscosity through the loads placed on the diaphragm pump. The volatilization of solvent in the tank causes the liquid viscosity thick, adding solvent causes the liquid thin.When the liquid’s viscosity thickens, the operating load of pump is increased, and then the pump’s frequency is getting low.When the liquid’s viscosity thins, the operating load of pump is decreased, and then the pump’s frequency is getting fast.Through this system keep solvent viscosity steady.

Product Application:

I. Roto-gravure and flexo printing: Food packaging printing, plastic bag printing, PVC calico paper printing and all kinds of plastic packaging printing.

II. Laminating: Food plastic packaging laminating, paper laminating and rubber laminating.

III. Coating: Bank card, negative, roll film, laser plate, car decorating etc., all kinds of substrate coating.

IV.ther use: All kinds of industry which is required for liquid viscosity consistency.

Installation Diagram:

Related products Specification:

Model	BML-10V	BML-15V	BML-20V
Dimension	760*350*280mm	760*350*280mm	790*380*300mm
Material	304 stainless steel	304 stainless steel	304 stainless steel
Net weight	19kg	21kg	25kg
Viscosity control range	NO.3:13~30s
		NO.4:13~50s
Control precision	2%	2%	2%
Suction hose	10*6.5mm*2m	11*8mm*2.3m	25*19mm*2.5m
Delivery hose	11*8mm*2m	16*11mm*2.3m	23*16mm*2.5m
Circulation volume	3.9 liters/min	8.8 liters/min	19 liters/min
Air consumption	40 liters/min	90 liters/min	160 liters/min
Working pressure	4KG	5KG	6KG
Working voltage	220V	220V	220V
Max. volume of tank	20L	40L	80L

Warrantyperiod:

Warranty period is one year from the date of factory disposal. During warranty period, we can repair problem products caused by products itself parts, material, process.