Automatic Beverage hot and cold cylinder for beverageheating, cooling, warm-keeping, sterilization and storing slurry

Hot and cold cylinder for beverage, 1.energy saving, 2.noise elimination, 3.corrosion resistance, 4.convenient to clean - details see: https://www.machineto.com/automatic-beverage-hot-and-cold-cylinder-for-beverageheating-cooling-warm-keeping-sterilization-and-storing-slurry-10025813

Processing:Heat Exchanger,noise elimination and corrosion resistance	Condition:New	Place of Origin:Henan China (Mainland)	Brand Name:AZEUS
Model Number:AUSLRG-300	Processing Types:Milk	Voltage:380v(custom as your requirement)	Power(W):0.55Kw
Weight:160Kg	Dimension(LWH):910x910x1420mm	Warranty:1 year	After-sales Service Provided:Engineers available to service machinery overseas
machine name:Hot and cold cylinder for beverage	material:stainless steel	Heating area:1.9 square meter,1.6 square meter	mixing speed:36 r/min
working pressure:0.09Mpa	test pressure:0.15Mpa	material exits and:40 DN	feature:noise elimination
application:dairy,food,pharmacy,chemical,beverage industries,etc

Automatic Beverage hot and cold cylinder for beverageheating, cooling, warm-keeping, sterilization and storing slurry

contact supplier for Automatic Beverage hot and cold cylinder for beverageheating, cooling, warm-keeping, sterilization and storing slurry

Hot and cold cylinder for beverage
(mixing tank/sterilizer)

Description of the Hot and cold cylinder for beverage:

The cooling and heating tank is also called aging tank.

Features of the Hot and cold cylinder for beverage:

1. energy saving

2. noise elimination

3. corrosion resistance

4. high efficiency

5. convenient to clean

Application of the Hot and cold cylinder for beverage:

It is widely used in dairy industries, food, pharmacy, chemical industry, beverage and so on..

And it is especially suitable for the milk pasteurization and insulation for the essential equipment of heating, cooling, warm-keeping, sterilization and storing slurry , which also is the essential equipment for ice cream production line.

Technical parameterone:

specification(L)	300	600	1000	2000	3000	4000	5000
Heating area (square meter)	1.9	2.5	4.5	7.5	8.5	10.5	12
Mixing speed (r/min)	36	36	36	36	36	36	36
Motor power(Kw)	0.55	0.75	1.1	1.5	1.5	1.5	2.2

Technical parameter two:

Nominal volume (L)	300	500		600		800		1000		1200		2000		3000		4000		5000
Working pressure	0.09Mpa
Test pressure	0.15Mpa
Mixing speed	36r/min
Heating area (square meter)	1.6		2.0		1.5		3.5		4.5		5.		7.5		8.5		10.5		13.3
Material exits and entrance(DN)	40		40		40		40		40		40		40		40		40		40

The Hot and cold cylinder for beverage consists of:

1. inner tank: made of 304 stainless steel plate with polishing surface.

2. middle jacket: made of A3 or 1Cr18Ni9Ti steel plate, and equipped with spiral stiffening ring, with which the water from the bottom up without pressure in order to reach the best warming and cooling status.

3. insulation group: made of stainless steel plate polished with fish scale pattern. The insulating layer uses polyurethance and glass wool to insulate from the outside temperature in order to keep insulation.

4. speed reducer: the cycloidal and pin wheel planetary gear speed reducer is fixed on the bracket of the beam. The shaft of the speed reducer is connected with the mixing paddle by a looper, which is easy to dismount, install and clean.

5. thermometer: 0°C~1000°C.the thermometer is fixed on the beam directly stick into the lowest position of the medium, which can indicate the temperature until the fluid is used to the lowest position to achieve the purpose of sterilization and ageing.

Accessaries with the machine:

1. pressure gage

2. safety valve

3. sluice valve of steam inlet

4. thermometer

Volume:

From 100L to 1T(can be custom as your requirement).

Pictures:

Any more information, please feel free to contact with me: