Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Concrete Machinery  >  Concrete Batching Plant

Yufeng AAC block production line, 1. Autoclaved Aerated Concrete, 2. Japan automatic system, 3. local experience, 4. aac plant - details see: https://www.machineto.com/autoclaved-aerated-concrete-aac-block-production-line-block-plant-yufeng-aac-plant-10090966

YUFENG Supplier of AAC plant,Aerated autoclaved concrete aac plant,aac block production plant ,AAC Plant Cutting Machinery

Introduction of Autoclaved Aerated Concrete Plant:

Autoclaved Aerated Concrete (AAC) Block, also called Light Block, used siliceous (fly ash, sand, slag) and calcareous (lime & cement) as the main raw materials, which through the process of batching, pouring, precuring, cutting, autoclaving, separating and packing to make into the final products. It is new type & environmental construction material and widely used for industry and civil building construction. AAC Block is the most mature technology of production and application in the worldwide nowadays.

1. Brief Introduction of Production Process:

1.1 Processing and storage of raw material:

Sand will be delivered to the plant via self-dumping truck and stored on the open yard. Bagged lime will be delivered to the plant by truck .Bagged gypsum powder will be delivered to the plant by truck Cement will be delivered to the plant via bulk tank truck .Aluminum powder or aluminum paste packaged in either barrel or bag will be delivered to the plant for temporary storage.

1.2 Batching and pouring:

When all kinds of raw material are ready, batching can be performed. Material in powder form (including lime, cement and gypsum) will be sent to powder metering scale for metering and weighing according to the given proportion. Sand slurry and recycled scrapped slurry will be sent to liquid metering hopper for scaling to the given proportion. As to the aluminum suspending liquid, Then the slurry will be poured into one mould.

1.3 Pre-curing (stopping and maintenance):

Slurry begins to foam after it is being poured into the mould and become preliminary curing. It will become the “cake” in 2 to 3 hours after stopping and pre-curing in the pre-curing room.

1.4 Cutting:

Cutting of “cake” shall be implemented after completion of foaming to form various sizes of product. Scraps formed during cutting will drop into the trench beneath the cutting machine and will be flushed by water into the scrap. Cutting and preparation of recycled scrap slurry will be controlled by the microcomputer program.

1.5 Autoclaving (steaming):

After completion of grouping the queued “cake” will enter the autoclave for steaming and hardening. Normally the autoclaving is in one cycle of 12 hours,

1.6 Post-autoclaving and finished product:

When the hardened finished product is hauled out of the autoclave, it will be handled onto the return line for side panel by use of the crane, then will stop at the block separating machine for separating. And then the finished product will be moved onto the wooden pallet placed onto the conveying line .

YUFENGOffering Autoclaved Aerated Concrete Plant with Following Annual Capacity:

50,000 m³Aerated Concrete Plant; 60,000 m³Aerated Concrete Plant;

100,000 m³Aerated Concrete Plant; 150,000 m³Aerated Concrete Plant;

200,000 m³Aerated Concrete Plant; 250,000 m³Aerated Concrete Plant;

300,000 m³Aerated Concrete Plant; 350,000 m³Aerated Concrete Plant;

400,000 m³Aerated Concrete Plant; 450,000 m³Aerated Concrete Plant;

Advantages & Features of Autoclaved Aerated Concrete Plant:

1. Light Weight: 300~800kg/m³

2. High Intensity: 3.5~10.0Mpa

3. Good Thermal Insulation Property: 0.1~0.20W/(m · k)

4. Keeping Temperature, Heat Resistant, Fireproof

5. Good Sound Insulation

6. Earthquake Proof

7. Good Machinability

8. Conveniently Mechanized Construction

AAC Production Line Brieft Flowchart Introduction

1. Raw Material Treatment

2. Mixing & Batching Treatment

3. Casting Treatment

4. Turning Transportation

5. Cutting

6. Semi Finished Block Transporation

7. Steam Autoclave Curing

8. Finished Block Transportation

9. Packing System

Remarks: welcome to request detail flowchart description or E-catalog by email.