Home  >  Construction Machinery  >  Building Material Machinery  >  Brick Making Machinery

AAC Areated Concrete Brick Making Equipment is growing rapidly development, it's been the construction industry pillar industry. - details see: https://www.machineto.com/autoclave-areated-concrete-production-line-10076392

Planning and design:
--- Factory covers an area of 25 acres or so.
--- There should be raw material area, finished block area and production area. Production process includes raw material disposal, rated material pouring, curing, cutting and steaming procedure.
--- From building foundation to equipments installing and testing, to trial producing, it will take 4-5 months.
--- Plant design: 2000 m2 or so.

Material:
1. Flyash: get dry ash from power plant
2. Cement: cement in bulk
3. Lime, gypsum and aluminum powder (buy in local area)

Water, electricity and steam supply:
1. Water supply: build a well or use waste water
2. Electricity supply: install a 315kv transformer

Product quality and specification
Quality
We produce according to PRC standard GB11968-1997 “Aerated Autoclaved Concrete Block Technology”.

1. Capacity category: 500, 600, 700kgs/ m3 (namely 3.5, 5.0, 7.5 Grade)
2. Compression strength level: 3.5, 5.0, 7.5Mpa (namely 3.5, 5.0, 7.5 Grade)
3. Drying shrinkage: 0.8mm/m
4. Thermal system: 0.11-0.22kcal/m.h.centigrade
5. Sound insulation value: 47.45db

Specification
Length: 600mm
Width: 100/ 125/ 150/ 200/ 250/ 300mm
Height: 150/ 200/ 250/ 300mm
Main technical parameters
a. Product capacity should be controlled around 650kgs/m3
b. Annual production capacity: 100,000 m3