Home  >  Chemical Process Machinery  >  Other Chemical Equipment

Atmospheric distillation equipment:, 1.cooperate with government, 2.strict quality controlling department, 3.vacuum pump - details see: https://www.machineto.com/atmospheric-distillation-equipment-10300022

Atmospheric Distillation equipment

Pyrolysis machine oil output:

Oil yied/day	Used tyres,scrap tyres	Big truck tyres	45%--50%
		Car tyres	40%
		Bicycles and motorcycles tyres	30%--35%
	Waste plastics	Fishing net,Safety net, farm-oriented film	45%--50%
		Conwenient bags , weave bags	40%
		Off –cut of recycled paper mill	20%--30%

Details of Tyre Pyrolysis Oil:

1. The raw materials: waste tires,plastics and rubber

2. Total Capacity: 5 tons/day, 8 tons/day,10 tons/day, 12 tons/day

3. the size of reactor:2.2m*6m,2.6m*6m, 2.8m*68m, 2.8m*6.6m

4.Average crude oil: 45%

5.Average carbon productivity :35%

6. Average steel productivity: Around 10%, depends on the tire kind

7.Average gas productivity: 5%-10%

8. The decompose temperature: maximum temperature is 380-400 degree Cm

9. Coal or firewood cost: 60kg or 70kg

10.Discharging time: 2-3 hours

11.Feed in time: 2 hour

12.Reactor depth-ratio: 2/3 minutes

13.Design pressure: 0.04 Mpa

Power Requirement of tyre pyrolysis oil:

System	Components	Power
Pyrolysis system	Feeding conveyor	4 kw
	Speed reducer	3kw or 4.5kw
	Reacotr, with cover and base
	Oil separator
Cooling system	Cooling pipes or condensors cooling
	Cooling tower	5.5 kw
Oil storeage system	Oil tank
	Heavy oil tank
Waste gas recycle system	Waste gas recycle system
	Fire guns
	3 Blower	0.25 kw
	Heating Furnace
Deduster system	Desulfurization deduster
	Water tank
	Draft fan	4 kw
	Chimney	6m long

Working process:

Firstly: two or three worker put the raw material into the furnace, seal the feed inlet .then burn the coal /wood in the bottom of the furnace or be heated by electricity directly and the bottom of the reactor will slowly heat the waste raw material .when the temperature reach of 250°C 280°C,we will get the crude oil ,the oil steam will be produced untill the temperature reach to 300°C 400°C.and then the oil steam will be separate to light and heavy component by separate divice.the light component will be entre to the condenser and meanwhile the residues will be discharged automatically in succession.after the condenser ,the liquefied part will be crude oil ,and the waste gas (it is mean that that part can not be liquified )will be return to heating supply system for burning by the way of combustion gas purification system.

If you have interest in our produce please feel free to contact me and I will try my best to you satisfaction.