Atlas Copco high pressure ancillary equipment CTE Cooling Towers Atlas Copco air cooler CTE520

Atlas Copco high pressure ancillary equipment CTE Cooling Towers Atlas Copco air cooler CTE520 - details see: https://www.machineto.com/atlas-copco-high-pressure-ancillary-equipment-cte-cooling-towers-atlas-copco-air-cooler-cte520-10209462

Place of Origin:Shanghai China (Mainland)	Brand Name:Atlas Copco	Model Number:CTE520	Type:Air cooler
Model:CTE520

Atlas Copco high pressure ancillary equipment CTE Cooling Towers Atlas Copcoair cooler Model CTE520

CTE Cooling Towers

High efficiency cooling

PURPOSE AND DEFINITION

The cooling tower decreases the water temperature of the compressor closed loop circuit down to the desired value at the compressor inlet. Cooling is obtained by evaporation. The cooling towers, designed for outdoor operation, can operate in ambient temperatures between -40°C and +40°C (-40°F and 104°F). Correct sizing is based on web bulb temperature (for example, a dry temperature of 30°C (86°F) will become 22.2°C (72°F) at 50% relative humidity)1. 1

Please contact us for optimal sizing according to site conditions.

RANGE

The dissipated power range extends from 204 to 847 kW for water flows between 13 and 53 m3/h (7.7 to 31 cfm) in the standard version.

FEATURES AND BENEFITS

Water saving with drift eliminators (maximum drift rate less than 0.001 % of the recirculation water rate)
High efficiency battery due to elliptical design of tubes for better heat exchange and improved water circulation
Autonomous regulation: the controller starts and stops the fans
Main electrical supply independent from the compressor
Easy access to basin for facilitated cleaning and low maintenance
Designed for a reduction of algae formation
Low electrical consumption

COMMON CHARACTERISTICS

Ambient temperatures: 0°C to 40°C (32°F to 104°F)
Max. inlet water temperature: 75°C (167°F)
Max. water pressure: 6 bar (87 psi)
400 V- 50 Hz - IEC-CE/GOST (ASME not applicable)
440 V - 60 Hz - IEC-CE (ASME not applicable)
ANSI-ISO flanges

DESCRIPTION2

Spray pump and water level switch
Deconcentration valve
Corrosion-free PVC drift eliminators
Corrosion-free PVC louvres
Completely closed basin
1 or 2 fans depending on models (extractor type fan)
Hot dip galvanized construction Z 725
Electric cubicle (including main switch, starters for fans and optional equipments when needed, 1-stage electronic controller to start and stop the fans, remote and local stop/start, and fault report)
Installation of the WPS water pump skid and OHE Open Heat Exchanger is recommended (supplied separately)

2 Connections and wiring to other equipment not included.

TEMPERATURE OPTIONS (ADDITIONAL FEATURES)

0°C to -18°C (32°F to -0.4°F)