Home  >  Industrial Supplies  >  Motor Parts  >  Motor Controller

1.ultra-quiet design, 2.small size, 3.lifelong lubricant - details see: https://www.machineto.com/atl-linear-actuator-10233750

ATL 25
Dynamic load up to 4.000 N
Max load[N]	4.000
Max linear speed [mm/sec]	100
Standard strokes lenghts [mm]	100, 200, 300, 400, 500, 600, 700, 800
Main features:
Rod diameter [mm]	25
Protective tube diameter [mm]	36
Motor flange European standard IEC	56 B14
Max static load - pull [N]	4.000
Max static load - push [N]	6.000
Actuator weight stroke 100 mm without motor [kg]	2,2
Additional weight each 100 mm	0,3
Duty cycle 30% over 10 min at 25°C room temperature. 5 worm gear ratios available. 12 different linear speeds availanle. Acme screw 1 or 2 starts. Lifelong grease lubricant for environmental temperature from -15 °C to +40 °C. On request: special execution for lower or higher environmental temperatures; customized stroke lengths lower or higher than standard strokes; push rod or protective tube in stainless steel; special executions for applications in food or chemical industries; motor mounting position on the opposite side (left hand); rear fixing turned 90°.
Input versions:
Standard motor flange IEC 56 B14; motor flange and extended input shaft; single input shaft; double input shaft.
Electric motors:
AC 3-phases 230 / 400 V 50 Hz IP 55 F, 2 or 4 poles, with ventilation system; AC motor 1-phase 230 V 50 Hz IP 55 F, 2 or 4 poles with ventilation system; DC motor 12 V or 24 V IP 54 F, without fan. AC and DC motors available with or without brake. AC motors in multivoltage executions, can operate also at 60 Hz. On request: special voltages, special wiring protections and insulations. Acme screw actuators are statically self-locking. Brake motor is recommended for stopping accuracy.
Accessories:
Magnetic reeds stroke end switches. Electrical stroke end switches. Overloads safety clutch. Front attachments: clevis end, ball joint, rod end. Rear fixing bracket. Encoder ENC4, incremental bidiretional encoder 4 pulses per 1 motor turn. Encoder EH53, incremental bidiretional encoder 100 or 500 pulses per 1 motor turn.