Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Road Machinery  >  Pavers

Intelligent Asphalt Distributor is used for spraying rubber asphalt, hot asphalt, emulsified asphalt, modified asphalt. - details see: https://www.machineto.com/asphalt-distributor-10118550

I. Overview

Our Intellectualized Asphalt Distributor is used for spraying asphalt on the prime coat, the water-proof layer and tack coat in high-graded road construction. It also can be used for bituminous pavement with the construction techniques of spreading in layers. It can spray hot asphalt, emulsified asphalt, modified asphalt, etc. It is mainly composed of Truck Chassis, Asphalt Tank, Asphalt Pumping and Spraying System, Heating System, Hydraulic Circuit, Pneumatic Circuit, Auto control System and Operation Panel

Ⅱ.Main performance

a) All operations can be performed in the cab.

b) Asphalt spraying rate kg/m2: 0.3-3

c) The width of spraying is adjustable. Each spraying nozzle can be controlled independently, and the maximum spraying width can reach 6 meters.

d) Spraying of asphalt is very even, and can realize to spray in three-overlapping.

e) Asphalt application rate is controlled by computer and independent of truck speed.

f) Heating and heat-preserving systems introduce full circulation of thermal oil, which is safe, reliable and full-automatic.

g) Thermal oil preserves heat of asphalt pump and spraying nozzles, which needn’t be washed by diesel oil after finishing spraying. It uses high-pressure air to drain the pipe and spraying nozzle or make use of thermal oil’s cycle to ensure pipelines and spraying nozzles not to be blocked.

h) Control System adopts modular design, which is very convenient to maintain and troubleshooting.

i) It is equipped with standby control system.

j) It can ensure machine to work normally when Main Control System failure.

k) It is equipped with flexible hand-spraying system.

l) Excellent heat-preservation and the average temp. Fall is less than 1 °C/h.

m) Loading and unloading asphalt is very convenient. Besides filling asphalt through manhole, asphalt can also be sucked into tank and drained by own pump.

n) See the table for the parameter

Technical parameters

No	Parameters	Unit	Standard Value	Remarks
1	Asphalt Tank Capacity	L	8000
2	Max. Spraying Width	mm	6000
3	Asphalt Application Rate (kg/m2)	kg/m2	0.3~3
4	Spraying Precision	%	2
5	Asphalt Heating Mode		Heat with hot oil
6	Diesel burner heat capacity	kcal/h	14×104
7	Average Temp. Fall	°C/h	≤1
8	Total Mass	kg	15800
9	Overall Dimensions	mm	8050×2400×3250