are machine specific and designed for Lathe, Mill, EDM, grinder

digital readout/dro system, multi-function simple operation, high-precision sensitive, Stable and durable, 0.5um 1um 5micron - details see: https://www.machineto.com/are-machine-specific-and-designed-for-lathe-mill-edm-grinder-10126915
Condition:NewType:UniversalCNC or Not:NormalPlace of Origin:China (Mainland)
Brand Name:HXXModel Number:GCSoutput signal:TTL EIA-422Voltage range:AC85V~250V,50HZ~60HZ
power consumption:25VAresolution:0.5um 1um 5umkeyboard:sensitive key padperformance:stable and durable
display:8 wordsweight:2.5KGaxes:1,2,3 or 4 axis 
are machine specific and designed for Lathe, Mill, EDM, grinder
contact supplier for are machine specific and designed for Lathe, Mill, EDM, grinder


Digital Readouts/DRO System

1:clear zero
2:reset
3:mm/inch
4:ABS/INC
5: 200 subdatum
6:power off Memory;
7: centering(1/2)
8:liner error compensation
9:sleepping mode
10:calculator
11:drilling of circumference
12:drilling of oblique line
13:machining of inclined plane
14:machining of circular arc
15:lathe function(match)
16:Rectangular lumen gradual processing
17:digital filtering

18:vibration filtering

19:R fucntion

Advantages

  • Improve accuracy
  • Improve production
  • Fewer mistakes
  • Fewer scrap parts
  • 2 Axes (X and Y)
  • LCD display
  • Error compensation
  • Graphic interface

Milling Functions

  • PCD
  • PCD Arc
  • Midpoint calculation
  • Line of holes calculation
  • Arc Milling
  • Array of holes
  • Zoom position for live path following

Lathe Functions

  • X & Y position readout
  • Taper angle calculator
  • Taper angle measure
  • Radius/Diameter Display

General Features

  • Absolute and incremental
  • Metric/Imperial
  • 1/2 current values
  • Radius/diameter display
  • Actual feed rate
  • Calculator
  • Linear error compensation

Milling machine NO 2 700*350

Milling machine NO 3 800*400

Milling machine NO 4 900*470

Grinding machine 618 350*200 1micron/5micron

Boring machine

Cylindrical grinding machine

Drilling machine

Cutting machine

Longmen milling machine

Wire cutting machine NO 25 300*400

Wire cutting machine NO 32 400*470

Wire cutting machine NO 35 400*500

Wire cutting machine NO 40 470*550

Wire cutting machine NO 45 450*550

Wire cutting machine NO 50 600*700

Digital readout not display1.Whether the power kine is connected. 2.Whether the power switch is connected. 3.Whether the power voltage is suitable. 4.The inside power of the linear scale is short circuit.
5.The safe pipe fusing or not.		1.Check the power line and connect it. 2.Connect the switch 3.The power voltage should between 100V~250V.
4.Pull out the connection of the linear scales.
5. Change the safe pipe.
The hull of the digital readout has electrification1.Check whether the lathe and the digital readout landing well.
2.Whether 220V power is leakage of electricity		1.Make sure the lathe and the digital readout landing well. 2.Check 220V power
One axis does not count1.Exchange the linear scale with anther axis,whether count. 2.The digital readout is under some special function1.If count normally,it is the stoppage of linear scale;if it does not count also ,it is the stoppage of digital readout. 2.Quit the special function
The linear scale does not count or sometimes1.Reading head is broken down.
2.There is foul inside the linear scale .
3. Short circuit or open circuit inside.		1.Adjust the install of the lathe and the linear scale,repair and change the linear scale.
2.Repair linear scale.
Anti-jamming function is not well1. Check whether the lathe and the digital readout landing well.
2.Whether the shielding line inputting connected well with the metal case.		1.Make sure the lathe and the digital readout landing well.
2.Connect it again.
The digital readoutdoes not count right,the distance displays is not the same as the actual distance1.Check whether the lathe and the digital readout landing well.
2.The lathe has a low precision.
3.The running speed is too fast of the lathe.
4.The installof the linear scale is not up to standard.low precision.

5.The resolution of the digital readout does not agree with the linear scale.

6.The dimension unit does not agree with the mm/inch.
7.The linear error compensation setting is not right.
8.Reading head is broken down

1.Make sure he lathe and the digital readout landing well.
2.Repair the lathe .
3.Slow down the speed.
4.Install the linear scale as required.

5.Reset the resolution.
6.Change mm/inch.

7.Reser the linear error compensation.
8.Change linear scale reading head.

Welcome our valued customers, we will be here to serve you !

--------Michael

are machine specific and designed for Lathe, Mill, EDM, grinder
Packaging Detail:* Using the carton filled with foam*We hope that the goods will reach you in perfect condition and give you full satisfaction.
Delivery Detail:Within 1-2days After PAYMENT

Related Product for are machine specific and designed for Lathe, Mill, EDM, grinder