Arc spraying machine SX-600W, thermal spray coating machine

* Stable performance arc spraying machine, * For alloy and carbon metal, * Suitable for aerial work, move arourd 100 meters - details see: https://www.machineto.com/arc-spraying-machine-sx-600w-thermal-spray-coating-machine-10162873

Type:Coating Spray Gun	Substrate:zinc,aluminum,pewter,copper,carbon steeland stainless steel and so on	Coating:Coil Coating	Place of Origin:Guangdong China (Mainland)
Brand Name:SX	Model Number:600W	Power supply:3*380V, 50/60HZ	Rated Current:600A
Rated input power:22KW	Input current:22A	Output voltage:≤45V	Output current:≤400A
Load factor:60%	Number of voltage regulator:3	Insulation grade:E class	Coating efficiency:zinc 5-12kg/h, Al 8-10kg/h, alloy 8-12kg/h

Arc spraying machine SX-600W, thermal spray coating machine

contact supplier for Arc spraying machine SX-600W, thermal spray coating machine

SX-600 arc spraying machine(arc spray machine)

We have 34 years of experience in manufacturing and construction applications. With the products, we can also provide a full set of technical support, including detailed description of process, introduction of spray materials, operating manuals, on-site construction services and any other support you need.

Brief Induction

Arc spraying machine SX-600 consists of power supply, supersonic arc spray gun, wire feeder, control system. Auxiliary equipments: Sand blast machine, air compressor machine. It uses the heat generated from electricity arc to melt metal wires, and pulverizes and cools down the molten wire with compressed air, then spray the pulverized metal particles to preprocessed surface at a high velocity to get a perfect coating.

It can use all kinds of metal and alloy materials(solid and cored), such as alloy wires, Mo, Al, Zn, copper, copper alloy, babbitt etc.

Wide spray gun extending range, spray metal wires up to 12kg/hour, and bond strength of coating can reach 70Mpa. Spray wire diameter from 1.6 ~ 3.0mm.

Advantages of process

1. Wear Protection against

Erosion
Fretting
Galling

2. Corrosion Protection against

Oxidation
Hot gas corrosion
Atmospheric corrosion

3. Thermal Barrier coating

4. Immersion corrosion

5. Reclamation of worn-out parts

6. Hardness up to 72HRc

7. Any coating on any metal

8. Rebuilding of under size parts

9. Electrical conductivity

Main parameters

power supply: three-phase 380V, 50Hz	rated current: 600A	rated input power: 22KW
input current: 22A	output volt: ≤ 45V	output current:≤400A
load factor:60%	volt regulating gear: 3	insulating grade: E
wire diameter:φ2mm	spray efficiency: zinc 5-12kg/h, Al 8-10kg/h, alloy 8-12kg/h
measurement:60×45×85cm	net weight:205kg

We also afford all sizes of accessories such as sand blasting machine, water-oil separator, spray exposure suit, helmet, breathing filter with the equipment.

Other main thermal spraying equipments and service:

(1) Vacuum Plasma Spray Machine

(2) Thermal Spray Coating Services

(3) HVOF spray equipment

(4) Plasma spray equipment

(5) Arc spray equipment

(6) Sputter Target Produce Equipment and technology

(7) Industrial water chillers

(8) Precious metal vacuum coating equipment

(9) Cooker magnetism and thermal conduction coating spraying production line

(10) Electro Brush Plating Equipment

(11) High power flame spray plastic equipment