Home  >  Raw Material Processing Machinery  >  Paper Product Making Machinery

According to customer requirements the rewinder can be built to desired raw material jumbo roll width, core, and outside diamete - details see: https://www.machineto.com/ar-bt100-automatic-bathroom-tissue-rools-rewinder-10334091

This automatic rewinder series incorporates the latest state of the art Programmable Logic Controller PLC, and Human Machine Interface HMI to allow the machine operator full control of all the functions of the machine. Also this system detects any abnormalities during running, automatically stops the line, and indicates to the operator where the fault occurred. The cycle starts when a premade core is automatically introduced by machine, then the perforated tissue web is wound onto this core. The whole process is done automatically from unwinding, embossing, perforating, cut-off at the desired sheet count, transfer onto the premade cores, sealing the end of the ready log, and finally ejecting the ready log for further processing. The machine is capable of running 1, 2 or 3 Ply Jumbo raw material Rolls. It can also be equipped with 1-4 unwind stands according to customer requirements. During the unwinding and rewinding the machine is equipped with web tension control units for perfect material feeding.

Basic Specifications:

According to customer requirements the rewinder can be built to desired raw material jumbo roll width, core, and outside diameter. Standard widths are: 1575, 1750, 2150, and 2750 mm. Core diameter: 3 inches (7.62 mm), and outside diameter of 1100 mm.

Finished roll outside diameter	60-150 mm (Tightness adjustable)
Finished roll core diameter	32-50 mm
Perforation length 4 blade	90-140 mm (To be specified by client)
Speed	Up to 200 m/min variable by frequency convertor
Raw material jumbo roll loading	Automatic by special pneumatic air pistons system
PLC, HMI, and variable frequency convertor	We use world renowned Mitsubishi or Siemens brands
Standard Power Requirement*	3 Phase, 380 volts, 50 Hz. Neutral plus good earth.
Compressed air requirement*	3 HP with minimum capacity of 4 kg/cm2
Power **	5.5-15 KW
Dimensions (L x W x H) **	6200 x 2600 x 1800 – 6200 x 4000 x 1800 mm
Weight **	3800-9000 Kg

*Power and compressed air supplies should be provided by client. ** Variable depending on machine configuration. Machine size, and options.

A wide range of options are available upon request, such as: Special embossing units, edge embossing units, special power requirement,1-3 ply unwinding units, coreless rewinding system, pneumatically separating unit, and raw material widths.

Note: Detailed specifications will be provided upon client request.