Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Grinding Equipment

APEX-YLF381-133A high energy ball milling machine:, compact structure, easy maintenance, easy operation, reliable performance - details see: https://www.machineto.com/apex-ylf381-133a-high-energy-ball-milling-machine-10284443

Hebi City Thermal Meter Instrument Factory, is a research, production, trade in one of the emerging technology-based enterprises. Company has a strong economic foundation, a strong network of relationships, a comprehensive technical and staffing, a large number of highly qualified professionals distributed in the research, production, marketing and other important positions. The adoption of advanced management mode, in accordance with the ISO9001: 2008 international quality system standards implementation of total quality management. We have a very wide range of commodity information network, partners throughout the country, we are in the "create the best service" business philosophy under the guidance through the unremitting efforts of all staff, has made remarkable achievements. My company has a proficient, operational ability of the backbone of the team, providing professional, personalized, all-weather, all-round service.

Planetary ball mill or production of the experimental sample to gel abrasive material particles (minimum to 0.1um) and mixed, homogenized and dispersed, whereby the test and analysis instruments. The instrument is mainly used in research institutes, universities and corporate laboratories, with a small, full-featured, high efficiency, low noise, wide range of features.

the main advantages of APEX-YLF381-133A high energy ball milling machine:

1, using the planetary ball milling tank movement, milling, high efficiency, fine granularity.

2, frequency control, test results can be selected according to the ideal speed.

3, the machine has a one-way, alternating, continuous, regular and irregular five kinds of operation mode, the drive can be controlled by the special.

4, the experiment could be obtained a variety of different sizes, different samples of material.

5, the center of gravity low, stable performance, compact structure, convenient operation, safe and reliable, low noise, no pollution, low loss.

Practice of APEX-YLF381-133A high energy ball milling machine:

1, turning one week, check the device without moving parts or around obstacles and eliminate. Allowed to stand around at startup.

2, After the check, press the start button to start the motor, note current changes. Ball machine no more than two consecutive start, the first and second every 5 minutes or more, if the third starter, and we must electrician, fitter cooperate with the inspection, before starting. Not the same with other devices, the staggered start to avoid tripping.

3, the ball machine after the normal operation, we must strictly follow water supply, to the mining, steel balls added provision prohibiting overload, idle time is not more than 15 minutes, so as not to bash liner.

4, the operation should be careful to check whether the leakage of plasma cylinder, carefully observe the current, voltage, feeding, water supply is normal, check once every half hour and the spindle motor temperature not greater than 60 °C, identify problems and timely treatment.

5, running to observe the hollow shaft, the oil ring is rotating with oil, the hollow shaft temperature is normal, if found hollow shaft fever, close to Burnt, should take immediate measures forced cooling may not stop immediately, so as to avoid "axle . "While paying attention to check the lubrication oil, temperature, time refueling.

6, ball park should stop to the mining, stand inside the concentrate dealt with, stop water supply. Press the stop button, pull down the gates

Maintenance and Repair of APEX-YLF381-133A high energy ball milling machine:

Maintenance and overhaul ball mill is a regular work, maintenance work has a direct impact mill operating rates and service life, then how in the course of proper maintenance and repair, to give the following description:

1, all the oil in the mill into continuous operation in a month should be all released, thoroughly cleaned, replace with new oil. After rounding the combination of oil change once every six months.

2, the lubrication points, lubrication and oil level checked at least once every four hours.

3, the mill operation, main bearing oil temperature does not exceed 55 ℃.

4, the normal operation of the mill, the drive bearings and gearbox temperature does not exceed 55 ℃, maximum does not exceed 60 ℃.

5, large and small gears smoothly without abnormal noise. If necessary, adjust the gap.

6, the mill running smoothly, without a strong vibration.

7, the motor current should be no abnormal fluctuations.

8, the connection no loose fasteners, combined with the surface without oil spills, five evasion water, seamless mineral phenomenon.

9, according to the wear of the ball in time to add.

When a ball mill regular maintenance work, repair work will have a direct impact on the functioning mill rate and service life. In order to detect deficiency to eliminate hidden dangers, in order to ensure the normal operation of its mill, in addition to routine maintenance, but also need to regularly stop grinding, (recommended once a month) for critical components such as hollow shaft, main bearings, cylinder, gear, size and other gear for serious examination, detailed records. Defects in order of priority according to the situation and arrange for appropriate action in the repair and overhaul program.

　　

To create brand, enhance their visibility and establish a corporate image, our spirit of "all the pursuit of quality, customer satisfaction for the purpose of "spirit," the most preferential prices, the most attentive service, the most reliable product quality" principle You solemn promise:

1, APEX-YLF381-133A high energy ball milling machine manufacturing and testing are quality records and test data.

2, the product performance testing, we sincerely invite users to visit the product of the whole process, all performance checks, was confirmed to be eligible after the boxed product shipped.

Technical parameters of APEX-YLF381-133A high energy ball milling machine:

model	APEX-YLF381
grinding tube diameter and length	Φ500 * 500MM
grinding drum speed	48r/min
loading capacity	100kg
once the material intake	5kg
into the grinding particle size	<7mm
the grinding time	about 30min
motor power	1.5KW
the power supply voltage	380V
the power frequency	50Hz

...