Home  >  Chemical Process Machinery  >  Pressure Vessels

APEX-YLF371-92A autoclave vessel:, All stainless steel, Easy to operate, safe and reliable - details see: https://www.machineto.com/apex-ylf371-92a-autoclave-vessel-10300925

Hebi City Thermal Meter Instrument Factory is a production of "XINFU brand pressure steam sterilizer" professional manufacturers. Our company has passed the ISO9001: 2008 quality management system certification standards. Strong technical force, processing equipment, advanced production technology. With large, medium and small vertical, horizontal circular, rectangular, pulse vacuum steam sterilizer system of production capacity. With a pressure vessel products and medical devices production qualification. The company has a sound quality assurance system, the company advanced management mode, high-quality production materials, scientific process guidance, advanced production technology and stringent testing procedures to ensure product quality.

The company is set research and development, design and production, sales and service integration of high-tech companies, to meet the pharmaceutical, food, medical care, research, biochemistry, agriculture and horticulture and tissue culture different requirements of different units such as sterilization needs, according to the different needs of customers tailored to special products, and is responsible for installation and commissioning follow-up work.

Applications of APEX-YLF371-92A

: Sterilizer Series products is the use of pressure saturated steam for rapid and reliable products for disinfection and sterilization equipment for medical and health services, scientific research, agriculture and other units, medical equipment, dressing, glassware, culture medium solution disinfection and sterilization, is the ideal device.

Features of APEX-YLF371-92A

:

self-controlled patented technology: hand wheel Open the door safety interlock

device housings, cylinder, baskets are made of SUS304 material, acid, alkali, corrosion

microcomputer intelligent control

Pressure safety interlock device, over temperature protection from raising type packing ring

exhaust cold air automatically low-level alarm, water controlled vent excess pressure from beep

reminding after sterilization

Proper Use of APEX-YLF371-92A:

Autoclave sterilization with fast, effective, reliable, high temperature, strong penetrating power, etc., used improperly, can cause sterilization failure. In the sterilization points should be noted:

First, the initial processing of sterile. Where contact with pathogenic microorganisms medical equipment, blankets, clothing, etc. should be disinfected with a chemical disinfectant, and then follow the routine cleaning. Especially infectious ward after using a range of items, to strictly, strict disinfection first, then cleaned and disinfected. Routine cleaning, first soak scrub with detergent solution to remove items on the oil, blood, dirt and other dirt, then rinse with water. A shaft section, alveolar and crannies and other equipment, and other items, should be as open or disassemble for thorough cleaning. After washing, the items should be dry, classified according to the clinical needs of each package in order to avoid re-contamination. Decontamination before and after the delivery of goods containers and tools should be strictly separated and clearly marked to prevent cross-infection.

Second, the sterile packaging and containers to the right. Packing with double white cotton cloth, the new package should wash cloth to pulp before use. Goods packaging tied with cord in order not to loose spread is appropriate, not too tight. Use in containers, the choice of either blocking external microbial invasion, there are better steam penetration. As a special syringe sterilization boxes, storage tanks and other equipment dressings. Aluminum difficult to access due to steam civilian, while inside the air is difficult to discharge, often can not be sterilized by conventional sterilization effect is achieved. Experimental comparison shows that the contamination rate is much higher than its medical aluminum case. So you can not use aluminum boxed syringes or civilian instrument sterilization.

Third, put in sterile should be reasonable. Sterile excessive or improper placement can affect the sterilization effect. Disinfection pot items can not be too crowded, not to exceed the pot size. Try to install a pot of similar items sterilized. If different types of items put in together, the amount should be sterilized items difficult to achieve the desired temperature and time shall prevail. Items put in, the cross should be shifted up and down, leaving a gap, so that the steam is easy to penetrate. Large disinfection should be standing on top shelf package, packet drop-storey enamel boxes and tanks should also be standing up cloth and metal objects simultaneously sterilized package should be placed in the lower metal objects, so that the two are basically the same heat, and to prevent metal objects condensed water generated during sterilization wet cloth.

Fourth, to drain the air. Using high pressure steam sterilizer, the most critical is the air drained pot. If the pot with air, the pressure pin is not a saturated steam under pressure in the pressure generated. The same pressure, mixed with air, the temperature of the steam generated by the steam below the saturation temperature.

Five, a reasonable calculation of sterilization time. Sterilization time include:

a. through time, starting from the pot reaches sterilization temperature calculation time, the pot is most difficult to achieve this temperature is reached the part of the time;

b. hold time, i.e. the time required to kill microorganisms, generally Bacillus stearothermophilus spores kill the time required to represent;

c. safety time, in order to ensure that the required increase in sterilization to get the exact time. Generally hot half the time of death, depending on its length may be sterile. Metal equipment for heat easily sterilized, no safe time. The sterilization time, pay attention to gauge, and the time to adjust the feed rate to keep the pressure to maintain the sterilization time elapses. In the sterilization process, if the pressure, temperature drop should be re-boost heating, re-timing.

Special Note to APEX-YLF371-92A:

The machine must be properly grounded.

Technical parameters of APEX-YLF371-92A:

Material	stainless steel
Capacity	100L
Power	220V 3.5kw
sterilization chamber size	Φ400 * 760mm
Volume	1260 * 500 * 500mm
Maximum operating temperature	138°C
maximum working pressure	0.25MPa

...