Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Industrial Heater

Adhesive Kapton Film Heater, 1.High tensile strength, 2.Low outgassing, 3.Thin lightweight profile, 4.High watt densities - details see: https://www.machineto.com/adhesive-kapton-film-heater-10245746

Description of Adhesive Kapton Film Heater:

Adhesive Kapton Film Heater offer superior tensile strength and tear resistance, with precision heat distribution. They are ideal for extreme temperature environments, from -319°F to +392°F (-195°C to +200°C). Heaters are in stock standard at 0.0007” (0.2mm) thick and up to 20”x26” (.508m x .660m) areas. Watt density is 5W/in2 (0.8W/cm2) standard, with units available to 50W/in2 (7.8W/cm2).

Kapton is an organic polymer with very high dielectric capabilities, while providing superior resistance to most solvents, oils, even radiation. With low out gassing, these heaters are useful in vacuum environments. Etched foil heating elements, with 12” (305mm) long Kapton or Teflon? leads, are standard. Silicone leads, as well as custom lengths, cord and plug sets available.

Being transparent, Kapton film also allows easy visual inspection on the internal structures. Pressure-sensitive adhesive (PSA) backing surface is standard, but NPH will customize your Kapton? heaters with special adhesives or mounting holes, as the application requires. Mechanical fasteners such as hooks, grommets, spring-loaded latches, snaps and Velcro? patches are also available. Minimum radius flexibility 1/32” (0.88mm) standard with weight of 1 1/2oz/ft2 (0.05g/cm2).

Application of Adhesive Kapton Film Heater:

1. Medical diagnostic instruments: Heat sample trays, reagent bottles, etc.
2. Stabilize optoelectronic components
3. Test or simulate integrated circuits
4. Enable cold weather operation of outdoor electronics such as laptap, ATM, LCD'S
5. Protect aircraft eletronic and mechanical devices in cold weather / area

Temperature Control Options of Adhesive Kapton Film Heater:

For temperature control on Kapton heaters, we recommends an RTD or thermocouple. Sensors are mounted to the surface of the heater and send a resistance measurement to an external controller that cycles the heater at a set temperature.

Adhesive Kapton Film HeaterMounting Options:

Pressure Sensitive Adhesive
PSA is the most common option for mounting Kapton heaters. By selecting proper materials, including the release agent, you can promote a strong bond and effective heat transfer.

Show ofAdhesive Kapton Film Heater: