addition cure silicone rubber

addition cure silicone rubber is suitable for :, 1)baby nipples, 2)moulds for cake and chocolate, 3)manual mold making - details see: https://www.machineto.com/addition-cure-silicone-rubber-10366707

Place of Origin:Guangdong China (Mainland)

Brand Name:HongYe silicone rubber

Model Number:E642# E630# E625# silicone rubber

color:Any color

contact supplier for addition cure silicone rubber

addition cure silicone rubber description:

addition cure silicone rubber is liquid silicone rubber which is suitable for molding technique with high transparency, strength, and tear strength. It is mainly used for making silicone rubber

products,such as baby nipples, medical tube,mold making for cake ,etc.

addition cure silicone rubber typical properties

addition cure silicone rubber is molding liquid silicone rubber with platinum catalyst, which is cured at both high temperature and room temperature.

Good features:

High transparency

Excellent tear strength

Good resilience

Good heat stability and weatherability ( temperature resistant range of -60--250)

Anti-yellowing

Heat-ageing resistance

Comply with USA CFR 21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EN14350-2 and EU RoHS Standard.

addition cure silicone rubber Standard Datasheet:

Item	E642 addition cure silicone rubber
Appearance	Yellowish transparent
Viscosity (Pa.S)	A: 6000 B: 12000
Density (g/cm³)	1.07
Hardness (A°)	42
Elongation at break (%)	400%
Tear strength (KN/mm)	15
Curing condition	After Mixed A with B according to mixing ratio of 1:1, E642 addtion cure silicone rubber mould will be formed within 8 hours under room temperature, 30 minutes under temperature of 100 C.