Home  >  Construction Machinery  >  Building Material Machinery  >  Brick Making Machinery

1. AAC Block tolerance within +/-1mm., 2. Production rate over 98%., 3. High automatic, low manpower., 4. No waste slurry. - details see: https://www.machineto.com/aac-production-line-10076242

The raw materials of ACC block are sand, cement, lime and gypsum, and the technological process of production of AAC block includes mixing, casting, cutting, curing, etc. The workshop section of technological flow of production includes mainly raw material transportation, hoist, grinding, material/weighing, casting, curing, etc.

Category	Production workshop section
Production workshop	Raw material preparation
	Mixing and casting
	Stay pre-curing
	Cutting and organizing into groups
	Autoclaving
	Product moving out
Assistant production workshop	Power distribution
	Steam distribution
	Air compressor
	Maintenance
	Laboratory

Main equipment:

1.Casting mixer

2.Cutting Machine

3.Autoclave

China National United Equipment Group Corp. is core corporation of China National Building Materials Group Corporation(world top 500) equipment set section. Gathered by state-level research institutes of Class A Qualifications for engineering design and the core backbone enterprises of manufacturing large-scale light industrial mechanical complete sets of equipment, CNUE has the best-selling products at home and abroad. CNEU enjoys very high reputation at home and abroad with strong technical force, and excellent product performance.
Sticking to the business principles of qualified manufacture, idealized innovation and customerized solution, headed by the scientific research, based on mechanical processing and manufacturing, CNUE provides the the complete solution and overall service covering the fields of food machines(beer, beverage and dairy products ), pulp and paper machines, electrical wire and cable machines, plastic machines, building materials machines, chemicals machines, chinaware machines, weighting apparatus manufacturing, washed coal machines and car parking system and so on.

The group corporation has the total assets over 2.5 billion. Annual sales income exceeds 2 billion.

Equipment advantage:

1. High cutting precision, the length and width tolerance of product can be controlled within 1mm.

2. Cutting vibration distance can reach 60-80mm, which can more easily cut to the cake bottom.

3. After cutting, the block is pushed to the autoclave without waste slurry on six sides.

4. The production rate is over 98%, which reduce the production cost.

5. Double layer cakes in autoclave, which improve the production efficiency.

6. High automatic, low manpower.

7. No waste slurry, economic and environmental protection.

AAC project cases:

1. April of 2005, Annual output of 200.000 sand AAC line of "Shenzhen green city new building material Corporation" was put to use.

2. July of 2006, Annual output of 150.000 sand AAC line of "Albania Flora Corporation" was put to use.

3. February of 2007, Annual output of 300.000 sand AAC line of "Fuzhou Aorando building material Corporation" was put to use.

4. May of 2008, Annual output of 200.000 sand AAC line of Zhejiang Zhongxia new building material Corporation" was put to use.

5. March of 2009, Annual output of 250.000 sand AAC line of Guizhou Longyuan new wall building material Corporation" was put to use.

6. February of 2010, Annual output of 200.000 sand AAC line of Huangshi shenzhou new building material Corporation" was put to use.

7. March of 2011, Annual output of 200.000 sand AAC line of Malaysia KIM HOE THYE & CO." was put to use.

Pre-sales:

1. Based on customer's requirement, we select equipment type in the principle of "Best cost performance is reached with most economical investment".

2. Provide the most reasonable program and give necessary illustration till accordant with customer.

3. Through negotiation, technical engineer can be sent to scene for layout for customer.

Mid-sales:

1. Design the technical documents such as whole equipment layout, construction bases layout, equipment installation drawings based on the scene.

2. Produce the equipments strictly as the contract when the customer is doing base construction.

3. Inspection before delivery, shipment organization and customer take-over..

After-sales:

1. Technical engineer will be sent to scene for instruction, installation and test run.

2. On-spot training for customer operator after installation and debug.

3. Irregular return visit to customer after normal production begins.