Home  >  Construction Machinery  >  Building Material Machinery  >  Brick Making Machinery

aac plant/aac block plant, 1.Can work continuously, 2.Low Maintenance, 3.high production rate, 4.ISO9001/CE - details see: https://www.machineto.com/aac-plant-aac-block-plant-turnkey-project-10076264

aac plant/aac block plant--turnkey project

AAC (Autoclave Aerated Concrete)is a new type building material where the raw materials are siliceous materials (fly-ash, sand, slag), calcareous materials (lime, cement and gypsum) and Aluminium powder.

AAC product has been widely used in industrial and civil construction. AAC product can be divided into AAC block and AAC plate.
AAC technology is recommended for large scale production and consumption.

Production of aeratedconcrete block,is asubstituteof solid clay brickideal wallmaterial,can meet the nationalMinistry of constructionbuildingenergy saving 50%constructionstandards,canthe wall materials to promote thereform of the new,inwhichbrings serious harmto thefly ash of industrial waste residue togetcomprehensive management and utilizationat the same time,can enjoya wall to changeand taxnumber of preferential policies,so as to obtain thebetter living environment,socialandeconomic benefits,have broad market prospects for development.

Feature of AAC

Light mass: 300-800 kg/ m3
Good thermal insulation property: 0.1-0.20W/(m.k)
High Intensity
Fireproofing
Good sound insulation
Heat resistant
Earthquake-proof
Mechanized construction

aac plant/aac block plant The preparing of the raw material
Fly ash(sand), gypsum
The slurry is the admixture of fly ash (sand) and gypsum. Mixed fly ash (sand) and gypsum in certain proportion in the slurry mixer tank, and then add water into slurry; finally, we can get the appropriate concentration slurry, and then it will be pumped by slurry pump into slurry tanks for pouring.
Quicklime
Massive quicklime is transported and stacked in the lime material shelter. The lime block is broken by jaw crusher, and then the belt conveyor will deliver it into ball mill; the ball mill will grind the lime into powder. Finally, the lime powder will be elevated into lime powder silo for reservation.
Cement
Use of bulk cement. Bulk cement is transported to the plant site by truck and then pumped directly into cement silos for reservation.
Aluminium Powder
Aluminum powder or aluminum powder (paste) in barrels purchased from market are stored in aluminum powder warehouse. The worker will weigh it, and then put it into aluminum mixer, then make a 5% suspension for reservation.
aac plant/aac block plant Recirculating slurry
Trims and scraps from cutting will fall into chute under the cutting machine. The water washes the scrap into the waste slurry tank. After mixing to a certain concentration, the waste slurry pump will pump it into the waste slurry tank.

aac plant/aac block plant Batching, Mixing, Pouring and pre-curing
Lime and cement was delivered into electronic powder scales by single screw pipe feeder. Through cumulative measurement, the unloading devices will dump them into pouring mixer.
Though the slurry tank valve, the fly ash (sand) pulp went into slurry tank, and then pumped into ingredients ceiling for measurement by electronic scale; when the weight of slurry achieve the requirement; the automatic control system stop putting slurry down by turn off the tank valve. The measured slurry will be put into pouring mixer
Aluminium is measured by manual, and then put into aluminium mixer for making suspension which was once per mould. The beated suspension was put into pouring mixer directly.
The temperature of slurry should be reached the process requirement before pouring. If the temperature is not enough, it could be heat by steam. When pouring, ferry cart carry the mould to the position under the pouring mixer, and then the pouring mixer put slurry into mould for pouring. After pouring, the mould with slurry will stay in the pre-curing room for 2-3 hours. During this period, the aluminium powder will react, and the hydrogen will be released under the action of Si and Ca material. The slurry will become the solid cake, and volume expand.

aac plant/aac block plant Cutting and grouping
After pre-curing and reach the cutting intensity (tested by special instrument or determined by production experience), the cake will be transported to cutting position through turning crane. The turning hoister will turn the mould in 90 degree and strip off the mould frame, and the cake will stand in the side plate. Finally, the longitudinal cutter and traverse cutter will cut the cake. After the cake was cut, the crane will transport it to the hardening carriage and group it in front of autoclave.

aac plant cutting machine Curing and leaving autoclave
The low speed winch will load grouped cake to the autoclave for curing. The cake will be in isopiestic pressure environment about 7-10 hours, and the vapor pressure is 1.3Mpa. The temperature of the autoclave is about 190 °C–210 °C . Cured cake will be pulled out of autoclave by low speed winch, and the end product will be transported manually to truck or store at the storage yard. Then hardening carriage and side plate will be return for recycling. Then the worker will assemble the mould with mould frame and side plate, and clean and oil it for new round.

aac plant/aac block plant The reclaim system of waste slurry
After cutting, the wet waste slurry will fall into pond under the cutting machine. The water will wash it into waste slurry mixer. Then mixed each other until reach the concentration, it will be pump into the batching section for reservation. According to the requirement of pouring, the waste slurry will add the appropriate proportion of raw material, and then for recycling use

aac plant/aac block plant is using a large amount of steel, special equipment production process. block mould, autoclave, pre-curing car, trolley and variety of rails tracks and other steels takes more than 70% in Complete production line , Although the production of aerated concrete ingredients, pouring, cutting, steam curing process was irreversible, And the process diagram was arranged , Dongyue aerated brick production line design team recommends you consider the following aspects:

1 Pls confirm the yearly capacity you want to invest?generally Annual output is 20,000m3 30000m3, 50,000 m3, 100000m3, 150000m3, 200000m3 and so on.Henan GUDE Machinery Manufacturing Co., Ltd. can be designed to increase annual production capacity of 2-400000m3/year.

2 Choose the suitedAACequipment, block mould, autoclave, pre-curing car, trolley and variety of rails tracks and other steels takes more than 70% in Complete production line. Therefore, this part investment is very important. Moreover, some devices can be made, and customers do not need to invest again

3 How to distribute the equipments

4 the factory design and factory layout

The choice for aac plant/aac block plantmanufacturers. Must choose a professional experienced manufacturer. Henan GUDEHeavy MachineryAerated brick production design team engaged in aerated concrete machinery maintenance, equipment management, technology development work in twenty-Nine years,make a lot of work on Technological innovation and transformation equipment! The design and construction and ingredients batching, workshop and equipments is all suited
Aerated block line investment from 750000 USD,500,000 USD Welcome to contact us at ur time, we will give you best advice based on the rationalization, help you to analyze the market according to your situation.