Home  >  Construction Machinery  >  Building Material Making Machinery Parts

AAC block cutting machine, 1.high quantity & competitive price, 2.PLC automatic batching, 3.full-automatic & air-invert cutting - details see: https://www.machineto.com/aac-block-cutting-machine-manufacturer-10078655

AAC Block Cutting Machine Supplier

1.Introduction
Areated concrete brick (light brick ) is the light and porous buidling material. It has light weight keeping temperature cant burn and other advantages.it can be made into many kinds of bricks(for example:600×200×100,80×80×180,240×115×53,600×200×125),they could be used industry building and common building.they are more and more popular in the world.in the future,they will replace the Clay brick completely.

2.Areated Concrete Common Conception
Common concrete density is usually 1600-2400kg/m3,but Areated concrete are 500kg/m3,600kg/m3,700kg/m3.It has not the big grain,main use silicon material (for example:coal ash,sand,stone dust and others ),through making the material small for example sand,they can be used directly if has enough degree of small (for example coal ash.Mixing calcium material lime cement water to a special slop,then add the aluminum dust and the additive.Make the aluminum dust and the special slop have a Chemical reflect.then produce Hydrogen to make the concrete slop to expanding or swell,foam.Next,put them into the curing room to concreting cutting steaming curing,last,there will bacome the light brick,the porous rate is 70-80%.

3.Advantages

light weight
Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay brick and 1/5 common concrete.So use the Light brick can reduce the weight of the build more,and also reduce the beam of roof and pillar press best.then you can see,it can save the material and cost,it also fighting shaking.
keeping temperature
It has many porous,the delivery hearting coefficient is 0.9-0.22W/(mk),the same as 1/4 or 1/5 of clay brick,so it is best materials now in the world. Also many kinds raw material,have lowest wasteMain Material:coal ash sand waste mine material coal stone,stone dust and other silicon materials.
We are the top leader in China on manufacturing the Autoclaved Aerated Concrete Line(AAC) with 65% market share. We have exported our lines to different countries -- Russia, Thailand, Ukraine, Middle East and so on.

We can supply our customer for designning, production, installation, commissioning, training and good after-sale service.
Capacity: from 50000 cubic meter to 400,000 cubic meters per year.

Raw materials:cement, lime, sand/flyash, gypsum, aluminium powder, water

Equipment list:The equipment will be divided into two parts: specialized equipments and universal equipments.

Specialized Main Equipment Includes:

1. AAC block cutting equipments: tilting crane, cutter.

2. Proportioning equipment: elecronic measuring scle, slurry beating machine, slurry storage tank, slurry mixer.

3. Pouring and autoclave equipments: aluminum powder mixer, pouring mixer, mould, side plate, autoclave truck, carrier car.

4. Enviornment protect equipments: dust remover.

Other Relative Equipments as follows:

1. AAC block cutting machine;

2. Tilting hanger, mould, side plate, hardening cart, mould frame, mould bottom, casting machine, hoist;

3. autoclave, horizontal installation stem boilerWhole production procession.

The AAC Production Technological Process:

1. The raw materials store in the material storehouse (or stores the pot) after dealing with reserve such as lime, cement, gypsum, sand (or fly ash)

2. Aluminium powder or aluminium lotion is through dealing with the reseve material for use

3. Raw materials measure according to certain matching by electron balance measure, aluminum powder, water put into aluminum mixer. it is suspends the liquid to make the mixture after measuring.

4. The batching water (cold water or hot water pitcher hot water) is measured by the electronic water balance.

5. Put into and pour among the mixers in certain order after, raw materails, aluminum powder suspend the liquid is measured, pour and enter the mould after mixing evenly (panel should be put network slice of reinforcing bar in advance in the mould)

6. Quiet to is it raise in advance to park through certain temperature and time, is it transport to the cutting machine to hang from upset hoist upset 90 degree after the base body reaches certain intensity, the drawiang of patterns is cut.

a. The base body carries on the side and cuts and mills through vertically at first;

b. Then carry on the verrtical level to cut;

c. Cut horizontally finally;

d. Cut good base body raises to cauldron car go on one yeard of shelves organize into groups to steam to transport to hang to drive a vehicle to load.

AAC Plants of Our Clients:

Clients Cooperation: