Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Punching Machines

press machine is used for jorging and forming metal sheet for home appliance, furniture, electronics,car, hardware and so on . - details see: https://www.machineto.com/80ton-press-machine-10133281

press machinefeature (BXP-80)

1. The main body of the machine is made with high-quality steel plate and by applying the processes of CNC cutting. CO2welding, sand polishing and temper treatment to guarantee the precision and stability.
2. All sliding-block is processed by applying CNC milling machine to guarantee precision.
3. Transmission shaft and gear are machined by milling machine made in Germany to guarantee jogging rate and reduce noise.
4. Sliding-block is positioned by applying six-face super-long alloy guide-rail to ensure stability and the capacity of countering load offset.
5. Applying balance cylinder to make it possible that the slide-block mold move under the status without gravity.
6. The manual or electrical adjustment device is used to facilitate operation and ensure the precision 0.1mm.
7. All parts of electrical appliance is made in Japan and Taiwan to ensure the stability of control loop.
8. The oil-sealing material made by the five Japanese corporations is used to ensure precision and service life.
9. The professional air-pressure type clutch with the control of Japan TACO double electromagnetic valve is used to guarantee the sensitivity of brake and safe.

10. Imported PLC matched with the imported cam controller to increase the functions of the machine.

11. International top overload device is used to test and cut off working status in a minute to guarantee personnel safe.

12. Good matching capacity to assembly with surround equipment

13. User-oriented interface (option) .

the User-oriented interface advantage: working status clear display, failure directly display, maintenance text display, pre-set counter, strong support for functional expansion, upper stop & automatic compensation .

14 .high-precision six-face copper- alloy guide-rail improve the capacity of countering side load, the side force is absorbed directly by machine body.

--- Beautiful and clean, generous, powerful firm.

--- Reasonable design, structure, gravity balance.

Performance:

--- Higher precision. We produce machines strictly according to Japan JIS1 standard. Main accessories are processed by imported CNC equipment.

--- Machine body is higher steel, stability.

--- running stable and durable.

--- High resistance to eccentric load capacity. Longer copper-alloy rail to ensure the slide movement balance, long-time precision stability.

--- Lower noise. lower than 75DB.

---The clutch is more stable and endurance.

--- Top imported overload device, can detect the air pressure over and protect in 0.01 second.

--- Electric circuit is stable. All electric parts are from Japan to ensure the controller to be stable.

---- Use Japan bearing and oil seal, to ensure machine precision and longer lifetime. Such as: NSK, NOK .

Function

1. operation conveniently.
2. different setting for continuous work, jogging work, safety-stroke, to satisfy your requirements.
3. bigger and wider working table and reasonable T gap. Suitable for different moulds fitting.
4. imported PLC and cam switch, enough functions, write controller procedure at any time, and you have big and enough enlarge space.
5. die height adjusted conveniently. The read precision is 0.1MM.
6. die height indicator show die height correctly.
7. electric crank angle indicator show stroke position clearly .
8. VS motor .
9. concentrated offer oil system

10. order slide running function, suitable for line connected using.

11. ejector device to protect mould safety.

12. misfeed detector function can make the working stop quickly.

13. solenoid stroke counter and preset counter is good for your produce management . \

14. when motor without enough power, and the running speed is too lower, the slide will stop automatically to protect.

15. Pneumatic down mould ejector device and upper mould ejector device is easy to eject material.

16. it will automatic alarm when clutch damaged.

Safety:

1. all transmission are set to be inside. No hidden damage.
2. emergency stop switch can stop the machine emergently when meet abnormal accident.
3. two hand safety circuit device.
4. overload protect device can detect press power over or not, and will stop in 0.01 second to protect.
5. cam workless detection circuit.
6. photo electric safety device . when enter into others, the machine will stop automatically.
7. double solenoid valve and overload device to ensure the clutch work normally.
8. when open electricity box, it will power off.
9. the backside safety curtain to protect person safety.

We offer 1 year quality guarantee. And offer lifetime service.

Parts name	Brand	Original place and remarks
Oil overload protection device	KOSMEK/ KINGAIR	JAPAN/TAIWAN
Concentrated supply oil system	HERG / IHI	TAIWAN , JAPAN
Electric adjustable–mold motor	FUTE BRAKE MOTOR	USA
ELECTRIC ANGLE INDICATOR	ASHTON	USA
CAM CONTROLLER	R-12	JAPAN
PLC CONTROLLER	Mitsubishi	JAPAN