Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Welding Equipment  >  MIG Welders

1). Devicenet Inside, 2). Synergic Adjustment, 3). Current, Voltage can be adjusted both on wire feeder and welding machine - details see: https://www.machineto.com/630a-stainless-steel-robotic-welding-equipment-10137254

DSP digital Robotic MIG/Pulse MIG/Double Pulse MIG Welding Machine

Specifications:

Model No.	400A	500A
Rated Input Voltage(V)	3-Phase, DC, 380V±15%, 50/60HZ
Rated Current(A)	10-400		10-500
Thickness(mm)	0mm~25mm
Wire Feed Speed(m/min)	1m/min~24m/min
Arc length(%)	-50%~50%
Arc Force	-50~50
Material type	13 kinds
Wire Diameter	0.8, 1.0, 1.2, 1.6
Operation mode	2T, 4T, S2T, S4T, Spot, JOB
Start current(HotI,%)	0%~200%
End Current (EndI,%)	0%~200%
Start time (Hott,s)	0.1s~15s
End Current Time (Endt,s)	0.1s~15s
Burning time (Burn,%)	0%-20%
Double Pulse Frequency(Freq, Hz)	0.5~5
Second Arc Length(AL2, %)	-50~50
Double Pulse Scope(Fd2)	0~2m/min
Bridging Time(SLOP, S)	0.1~15s

Features:

1). DEVICENET inside, so it could connect to robot and special system, easy to achieve automatical welding.

2). LVO function

3). Advanced all digital soft-switch inverter technology, good dynamic characteristics, high reliability, Energy saving

4). Arc Strike Method for TIG: HF / Contact Arc Strike

5). No Splash, saving material, no need to clear, saving labor cost, perfect welding performance

6). DSP Control

7). Inverter

8). Ampere: 315A, 350A, 400A, 500A, 630A

9). With 100 sets of storage memory

10). Synergic Adjustment

11). Suitable for all kinds of welding position

12). VRD function

13). Gas Heat Function

14). Low Noise

15). Multi-function: MMA, TIG, Pulse TIG, Spot TIG, MIG, Pulse MIG, Double-pulse MIG

16). Protective circuit of over-heat, over-current and over-voltage

17). Compensation function to voltage fluctuation, with strong voltage fluctuation resistant ability

18). It has 2T, 4T, Spot welding, special system modes

19). Suitable for all kinds of welding position

20). Air Cooled & Water Cooled for choice

21). Current, Voltage Adjust can be adjusted and show on both wire feeder and welding machine

22). Welding Material: Carbon Steel, Stainless Steel, Aluminum Alloy, Copper Alloy, and etc

23). Available to set the parameters of start current, start time, welding current and arc force separately, not only to melt through the thin sheet, but also guarantee the quality of the arc strike joint

24). Brand: Forever Star

25). It could pre-set the current, wire feed rate, thickness, wire diameter and voltage and inductance, the LCD displays the welding current and voltage

26). The parameters could be set, such as inching wire feed speed, soft start speed, gas pre-flow and gas post-flow, burn time, start current and end current and etc

27). Advanced double pulse MIG welding process, overlie a pulse on the base of pulse MIG, the performance of fish-scale pattern can be realized without swing

30). With the welding expert system inside, it has the different expert curve for rutil flux-cored wire, basic flux-cored wire, Cellulose electrode, which makes the welding perfectly

28). The wire feeder adopt the digital encoder and dual drive, it has the function of speed feedback to ensure the stability of wire feed speed. The parameters could be set, such as inching wire feed speed, soft start speed, gas pre-flow and gas post-flow, burn-back time, start current and end current and etc

29). It’s able to realize the centralized monitoring and control, it has WIFI model inside, so it could be communicated with the computer, cell phone and wireless devices inside the wireless LAN

30). Deep weld penetration, because of the hammering action of the peak current, the penetration is much deeper than the MIG

31). After-Service: 3-year warranty

32). Delivery Time: Within 5-7 Days after receipt the payment in advance

33). Supply Ability: 3000pcs/Month

34). OEM: Yes

35). Term Of Payment: T/T, L/C, Western Union, Money Gram

36). Seaport: Tianjin, Qingdao, Shanghai, Ningbo, Shenzhen seaport and etc

Standard Accessories:

Power Source: 1PC

Wire feeder: 1set(Remote Control)

Air cooled MIG welding gun: 1PC(3m cable)

Comprehensive Cable: 1.5m: 1PC

Electrode Holder: 1PC

Earth Clamp: 1PC

Cable:

400A: 3m*35mm2: 2PCS

500A: 3m*50mm2: 2PCS

Fast plug: DKJ70 2PCS

CO2 flowmeter: 1PC