Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Conveyors

weigh belt feeder featuires:, 1.only for normal temperature use, 2.for wet and dry material, 3.inclined and horizontal transport - details see: https://www.machineto.com/500mm-to-1500mm-room-temperature-rubber-weigh-belt-feeder-10197251

500mm to 1500mm room temperature rubber weigh belt feeder

Details for weigh belt feeder :

The weigh belt feeder manufactured by Kunding can be classified into several kinds, like fixed modular belt conveyor, extensible modular belt conveyor. It is applicable for materials' successive transportation in mine and cement line to transport bulk materials and finished products. Besides, it also has a wide range of applications in matellurgical, coal, chemical, water&power industry. With good commonality and changeability of components, there is no doubt that these mineral band conveyors supplied by our company can cut down on capital cost greatly and accelerate the schedule of projects. Moreover, covering area can be narrowed and investment cost reduced when it is used on the ground.

Operating principle for weigh belt feeder

The scope of temperature suitable for using belt conveyor is-20°---+40°and the temperature of materials conveyed should be below 50º. In order to confirm the weight of materials on the rubber belt, materials to be transported should be weighed by weightometer first. At the same time, digital speed detection system installed in the rear is continuously measuring the operating speed of feeder which should be directly proportional to the velocity pulse output. Speed signal and weight signal are together transmitted to the controller of the feeder and detected by the microprocessor of the controller, thus the materials’ accumulation and instaneous flowrate can be showed out. Finally, the results measured should be compared with the flowrate set and the controller controls belt conveyor under the help of the information. So it is easy to achieve quantitative feed.

Features for weigh belt feeder

1.simple structure

2.easy maintenance

3.standard components

4.large delivery capacity

5.long transporting distance

technical parameters for weigh belt feeder

type	model	Original model	Delivery capacity (t/h)	Transporting distance (m)	Belt speed (m/s)	Belt width (mm)	Diameter of driving roller (mm)	Power (kw)	Dimension of machine head (mm)	Weight (t)
Fixed belt conveyor	STJ-650	SJ-44P	200	800	1.6	650	500	2*22	1751*1366
	STD-650	SD-44P	200	800	1.6	650	500	2*22	1751*1366	42.5
	STJ-800	SJ-80P	400	800/600	2	800	500	2*40	1961*1443	53.7/41.7
	STD-800	SD-80P	400	800	2	800	500	2*40	1961*1443	43.7
	STJ-1000	SJD-150P	630	1000	1.9	1000	630	2*75	2266*1615	68
	STD-1000	SD-150P	630	1000	1.9	1000	630	2*75	2266*1615	68
	TD-75	Belt width(mm):500,800,1000.1200. belt length and motor power can be customized according to customers’ detailed requirements