Home  >  Chemical Process Machinery  >  Other Chemical Equipment

BioDiesel Processor, Production is Simple, Digitally controlled timing system, Inline regulated heating system, Manufacture - details see: https://www.machineto.com/500l-waste-oil-machine-biodiesel-processor-2hrs-patch-10300267

500L waste oil machine, biodiesel processor, 2hrs/patch

Anybody can make biodiesel. It's easy, you can make it in your kitchen -- and it's BETTER than the petro-diesel fuel the big oil companies sell you. Your diesel motor will run better and last longer on your home-made fuel, and it's much cleaner -- better for the environment and better for health. If you make it from used cooking oil it's not only cheap but you'll be recycling a troublesome waste product. Best of all is the GREAT feeling of freedom, independence and empowerment it will give you.

Higher viscosity is not the only problem with using vegetable oil as fuel. Veg-oil has different chemical properties and combustion characteristics from the petroleum diesel fuel for which diesel engines and their fuel systems are designed. Diesel engines are high-tech machines with very precise fuel requirements, especially the more modern, cleaner-burning diesel. They're tough but they'll only take so much abuse.

FEATURE:

lCompletely Assembled and Tested

lSimple plumbing for easy running

lSUS304 stainless steel material for anti-rust-corrosion

lPlastic distribution box for safe running and quality insulation

lPre-filtering sieve is available

lOil Pre-heater and Dewatering Intake Barrel

lCentrifugal pump blending the material without splash via self cycling

lCorn tank for full draining

lDigital temperature Gauge

lDurable Pipe Circulation Lines are wrapped in stainless steel pipe

lPush type with brake for easy moving

SPECIFICATION:

Capacity: yield 350-375L biodiesel per batch

Power : 6500W

Voltage: 380Vac three phase

Pump power: 2200W

Pump type:Centrifugal pump

SYSTEM INCLUDES:

1. Reactor:major cone tank for feedstock oil with pre-heating system.
2. Methanol tank:The methanol and NAOH are put into this tank and pumped into the reactor.
3. Pump:pumping &self cycling. The pump used for pumping the catalyst to the feedstock oil, mix via self cycling.
4. Distribution box:This system comes with a plastic distribution box for switch of pump on and off, heating, indication, easy operating.
5. liquidometer

APPLICATION SCOPE:

The unit suits for all kind of vegetable oil, waste vegetable, animal fat, used cooking oil.

PROCEDURE:

1. Feedstock to the major big tank.
2. Heating the feedstock oil , set the temperature at 50°C-56°C,press the “heating on” to heat the feedstock oil, the heating pipe will stop heating automatically when the temperature meet your setting.
3. Feedstock the methanol (100L as 20% oil volume) and NAOH liquid (5Las 1% oil volume) to the small tank.
4. Open valves 1 and 6 , so the catalyze pump into the major big tank.
5. Close the Valve 6, keep the valves 1 and 4 on, to blend the feedstock oil and catalyze thoroughly (1 hour for blending).
6. Phosphate is added (5L, as 1% oil volume).
7. Blend for 10-20 minutes, then let settle for 2-3hrs.
8. Open valves 5 and 7to remove the glycerin.
9. The final biodiesel is pumped into the storage tank through valves 3 and 4.