Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Vacuum Drying Equipment

1) 30 segments temperature profile programmable, 2) Maximum Heating Rate: 4~6C/min, 3) Vacuum Dry Oven +/- 5C accuracy - details see: https://www.machineto.com/400c-high-temperature-laboratory-vacuum-dry-oven-for-drying-53l-10297626

The JY-53VO series Vacuum Dry Oven is CE certified. It can be heated up to 350-450C. A 50-500ml flow meter is installed in the front panel for user to simply control and create a gas environment in the chamber. All necessary accessories are in the package including vacuum pump, fittings, hoses, etc.

Features of Vacuum Dry Oven:

1) Radiant warm wall heating system provides optimal uniformity and conserves chamber space for drying, curing, vacuum embedding, and plating applications.

2) 3" (7.6 cm) glass wool insulation prevents heat loss from working chamber

3) Silicone door gasket and positive latch door maintain seal at all vacuum levels

4) Exclusive polycarbonate safety shield protects door glass

5) 28 segments programmable digital temperature controller with +/- 1.5°C accuracy

6) Maximum Heating Rate: 4~6 ºC/min

7) Vacuum fittings require .25" (6.35 mm) I.D. tubing

8) Easy-to-clean #304 stainless steel chamber interior

9) 2 stainless steel shelves were included for immediate use

10) Vacuum and air lines constructed with corrosion-resistant stainless steel tubing for optimum chamber cleanliness and long term performance.

Specifications:

Voltage	220VAC 50/60HZ (Power cable is included w/o plug)
Power	1800W
Heating Temp	Continuous: 250-350C Max 350-450C
Chamber and Door	Chamber dimensions: 415 mm x 345 mm x 370 mm ( 16.3 x 13.5 x 14.5", 53 Liter ) The chamber is structured with stainless steel and welded with bracing pieces. Silicone door gasket and positive latch door ensure the good sealing 2 stainless steel shelves are included to facilitate processing efficiency.
Temperature Controller	30 segments programmable Built-in over-temperature protection +/- 5°C accuracy
Gas flowing/purging	A precise flow meter is installed in the front panel which ranges from 50 ~ 500ml/min. The gas is able to be continuously flowing into the chamber at a constant flow rate defined by user during operation. The oven can be purged by inert gas before operation.
Fittings & Connectors	One vacuum port is used for quick connection to vacuum pump. Two water/coolant inets connects the chiller. (tubes are included) One 1/4" swagelok tube fittings is for inert gas supply. One needle valve is used to control the input gas
Vacuum Pump	One Dual stage vacuum pump with with Exhaust Filter is included. Vacuum level of oven after pumping < 133pa (2 torr) Power: 1/2HP 375W
Dimensions	Oven: 43" x 32" x 34" (L x W x H) Chiller: 550 X 280 X 430 mm (L x W x H)
Certification	CE certified
Warranty	3 years limited manufacture warranty (Comsumable parts such as silicon gaskets are not covered by the warranty)

Standard Package:

Name	Qty
High temp. Vacuum oven (12 x 12 x 11", 25L, 400°C)	1
Ø12mm Polyurethane tube	2
Stainless steel shelves	2
Power cord Dual stage vacuum pump with with Exhaust Filter, Flexible Stainless Steel Vacuum Hose ( Bellows ), 1 meter Two sets Quick Clamp with Rubber O-Ring	1 set

Vacuum Dry Oven Operation:

1) For using under vacuum, it is necessary to have the vacuum pump

2) 30 segments temperature profile programmable

3) Vacuum level displayed on gauges from 0 to 30" Hg

4) PID precision Digital Power controller controls temperature with a uniformity of +/-5°C@ 100°C; 25" Hg at center hot zone, 6'x6' center area only ) and built-in over temperature protection