Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Forklifts

good after-sales service, Competitive price and high quality, fast delivery, High-performance, 3 ton diesel forklift truck - details see: https://www.machineto.com/3tons-forklift-for-sale-qingong-3ton-diesel-powered-forklift-cpcd25f-price-pallet-truck-10109728

QINGONG Engine Powered Forklift adopts diesel engine of famous foreign brand, which guarantees the power. The variable transmission system takes the high reliability mechanical gearshift or hydraulic gearshift system. The structural frame features box type, new type of door frame with good visibility, convenient and flexible hydraulic power steering. The machine is also equipped with cast rigid drive axle and plate-fin cooler. The machine is comfortable to operate and has high reliability and reliability .

MODEL		CPCD 30F
Load capacity kg		3000
Load center mm		500
Power type		Diesel
Max.lifting speeds(with load) mm/s		400
Max.Driving speeds(with without load) km/h		18/20
Max.Towing(with without load) kN		14.5/9.8
Gradeability(with/without load) %		15/20
Lifting height mm		3000
Free lift mm		80
Tilting angles(forward-backward)		6/12
Min.turning radius mm		2450
Min.right angle aisle width mm		2110
Min.under-clearance mm		135
Dimensions	Overall length mm	3790
	Overall width mm	1228
	Overall height(mast lowered) mm	2110
	Overall height(mast extend) mm	4250
Overall height to overhead guard mm		2090
Fork overhang mm		494
Wheel base mm		1700
Tread Tyre	Front tread mm	1000
	Front tread mm	970
	Front tread	289-15
	Front tread	6.50-10
Total weight kg		4320
Fork width mm		125
Fork thickness mm		45
Backrest height mm		1195
Fork length mm		1200
Engine	Engine model	A490BPG
	Rate power KW	37
	Ratate Speed At Rate Power rpm	2650
	Max.torque Nm	148
	Rotate speed at max torque rpm	1800-1900
Type of power shift		Clutch	Tor-con(Hydraulic)

A forklift truck (also called a lift truck, a fork truck, or a forklift) is a powered industrial truckused to lift and transport materials.

The forklift has since become an indispensable piece of equipment in manufacturing and warehousing operations.

A typical counterbalanced forklift contains the following components:

Truck Frame - The frame may have fuel and hydraulic fluid tanks constructed as part of the frame assembly.

Counterweight - is a mass attached to the rear of the forklift truck frame.

Cab - The cab area may be open air or enclosed, but it is covered by the cage-like overhead guard assembly.

Overhead Guard - On some forklifts, the overhead guard is an integrated part of the frame assembly.

Power Source - may consist of an internal combustion engine that can be powered by LP gas, CNG gas, gasoline or diesel fuel.

Tilt Cylinders - are hydraulic cylinders that are mounted to the truck frame and the mast. The tilt cylinders pivot the mast backward or forward to assist in engaging a load.

Mast - is the vertical assembly that does the work of raising and lowering the load.

Carriage - It is mounted into and moves up and down the mast rails by means of chains or by being directly attached to the hydraulic cylinder.

Load Back Rest - is a rack-like extension that is either bolted or welded to the carriage in order to prevent the load from shifting backward when the carriage is lifted to full height.

Attachments - A variety of material handling attachments are available.

Tires - either solid for indoor use, or pneumatic for outside use.

Any attachment on a forklift will reduce its nominal load rating, which is computed with a stock fork carriage and forks. The actual load rating may be significantly lower.

If you want to know detailed and professional information , please have no hesitation to contact with us and we will respond to you timely .

Thanks & best regards

Kavy Guo

Jinan Qingong International Co.,Ltd.

Cell phone : 86 15318838930

Email: guokq AT qingong.cn

skype:Kavy.Guo

Msn:guokaiqiang23 AT hotmail.com