Home  >  Industrial Supplies  >  Motor Parts  >  Motor Driver

3D printers StepStick DRV8825 stepper motor driver - details see: https://www.machineto.com/3d-printers-stepstick-drv8825-stepper-motor-driver-10234475

Brief introduction

The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor drive is a breakthrough. The module has an interface pinout and our A4988 stepper motor drive carrier is almost the same, so that it can be used as a higher performance in a pull-down menu the plates replaced in many applications. DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step). It uses 8.2 - 45 V, can provide up to about 1.5 per phase no heat sink or forced air flow (rated up to 2.2 per volume sufficient additional cooling).

Product Features

1 easy step and direction control interface
(2) six different steps resolutions: full step, half step, 1/4-step1/8-step1/16-step, 1/32-step
3.CAN interface directly with 3.3 V and 5 V systems
4 Thermal Shutdown over-temperature, over-current shutdown, undervoltage lockout
5 short to ground short circuit load protection
6.4 layer 2 oz copper PCB, to increase the cooling
7 exposed pad driver IC below the printed circuit board on the bottom of the ground pad
8 module size, and interface matching pin A4988 stepper motor driver carriers in many ways
9 adjustable current control lets you set up a potentiometer, which lets you use the stepper motor's rated voltage or more, in order to achieve a higher maximum output current step rate
10 Intelligent chopping control automatically selects the correct current decay mode (fast decay or slow decay)
11 Maximum 45 V supply voltage
12 built-in voltage regulator (the need for any external logic supply voltage)

Check photos:

Shipping express way

1. The goods will be shipped without tracking number within 1-7 business working days. after confirmed the payment.
2. The goods can be shipped by your choice. If the curiers or the post office with tracking number.We will provider you with the updated shipping cost as per your request. The following is the estimated delivery time for the different shipping way. Pls contact us directly and we will use your preferred way. We cooperate with more express forwarder in China. So we can get more discount in the shipping way.

Payment terms:

1. TT

2. alipay

3. western union

Warranty and return policy

1. our product has been carefully inspeated by us. So we are pleased to offer our buyer satisfaction.

2. If the items are defective. pls informed us within 3 days of delivery. Pls contact your salesperson before returning the products. We will either replacement or refund upon receupt the defective item. Customers are responsible for the return shipping cost.

3.You can return the goods to us within the warranty day if the goods was broken.

4. If the goods are damaged due to the transportation process,we do not have responsibility,but we will try our best to help you to get the compensation from the transport company .

5. After getting the returned item, we will refund the customer at the item's price ( excluding the shipping costs to and from )

Feedback

Feedback is the breakfast for the champion.Your feedback is very improtant to our business development and gauge of how can we doing. We sincerely invite you to leave positive feedback for us service.If you are satsdfied with our products and services.