Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Flash Drying Equipment

1.Cool curing by LED UV, 2.High power:UV output 8000mw/cm2(max), 3.Long life:25000H, 4.top quality high light intensity LED - details see: https://www.machineto.com/365nm-uv-curing-unit-for-varnish-and-lacquer-drying-10290785

365nm uv curing unit for varnish and lacquer drying

Overview

• Use latest high power UV LED and best optical focus
• Provides excellent and stable UV irradiation performance
• Estimated light source life:20,000+ hours
• Instant on/off
• Low running cost
• LED for thermal distortion-less
• UV irradiation for distortion-less
• Easy operation, installation, energy efficiency and environmental friendly
• More reliable UV irradiation achieved by higher head-cooling efficiency

Applications

• Small size fast UV glue curing
• Optical components adhesive
• Lens module bonding
• Medical device curing
• Optical communication components drying
• Ferrule parts assembly Part fixation after alignment
• Coil wire processing Coil wire fixation and end processing
• Injection needle fixation

Advantage:

1/ The 365 nm wavelength enables clear UV irradiation. The irradiation beam does not contain infrared rays,minimizing the temperature rise of work piece. This is ideal for applications that require low temperature,

high precision bonding with minimum thermal distortion, such as the assembly of thin plastic lenses.

2/The UCT series emits nearly monochromaticlight at a peak of 365 nm. This eliminates any effects on the object being irradiated, which might be caused by light at wavelengths Shorter than 350 nm or longer than 400nm.

3/Designed for more efficient energy saving than competitors' products, the UP series offers low power consumption of less than 40 VA (during 4- desired number of LED/driver modules head operation ).

4/Select the number of LED/driver modules you need when ordering Later add any desired number of LED/driver modules any time for expansion. Up to 4 heads can be installed in one unit.

5/ Generally, when the LED temperature rises, the output decreases. The heads for UP series have improved heat radiation efficiency, which reduces such temperature rises. The system with temperature compensation based on the LED temperature rises to prevent the output from decreasing. The feedback control and the improved heat irradiation performance of the heads have achieved stable UV irradiation even during continuous lighting of the UV-LED.

6/ Switches are located where they are easiest to operate. The large LCD increases visibility and easy operation is achieved through a special design that includes an button layout

Specification:

LENS	Part No.	Spot Diameter	Work Distance	Light Intensity
NORMAL LENS	UPUL001	1.5 mm	7 mm	8000 mw/cm2
	UPUL002	2 mm	7 mm	6500 mw/cm2
	UPUL003	3 mm	7 mm	5200 mw/cm2
	UPUL004	4 mm	14 mm	3800 mw/cm2
	UPUL005	5 mm	16 mm	2800 mw/cm2
	UPUL006	6 mm	17 mm	2700 mw/cm2
	UPUL007	7 mm	21 mm	2100 mw/cm2
	UPUL008	8 mm	27 mm	1200 mw/cm2
	UPUL010	10 mm	25 mm	900 mw/cm2
	UPUL012	12 mm	25 mm	700 mw/cm2
	UPUL016	16 mm	38 mm	500 mw/cm2
SPECIFIC LENS	UPULC16	8-16 mm RING-SHAPED	27 mm	250 mw/cm2
	UPULL15	3*15 mm	11 mm	580 mw/cm2
	UPULL20	5*20 mm	17 mm	480 mw/cm2
STICK LENS	UPULR04	3 mm	7 mm	1840 mw/cm2