Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Cranes  >  Other Cranes

capacity:3.2-32ton, span:12-30m, lifting height:6-24m, type:360 degree floor mounted pedestal cranes - details see: https://www.machineto.com/360-degree-floor-mounted-pedestal-cranes-10101929

360 degree floor mounted pedestal cranes

Brief introduction of 360 degree floor mounted pedestal cranes

Column-Mounted Jib Cheap Crane is a new generation of the hoist equipment developed to meet the requirement of modernized production.

This machine suitable to work in the dock, warehouse, workshop etc fixed working conditions, it can work within the 360 degrees to liftand materials handling.

It's fixed on the floor and it could stand independently. And the arm fixed on the top of fixed pillar. If the arm needs swing,

the swing motor will be equipped on crane! And then the electrical will be installed on the crane as per actual demands.

Contrlo method of 360 degree floor mounted pedestal cranes

Pendent line with press button or remote control or both.

Application of 360 degree floor mounted pedestal cranes

widely, such asdock, warehouse, workshop etc

Environment of 360 degree floor mounted pedestal cranes

1). Power source is three-phase alternating current, rated frequency is50HZ, rated voltage is 380v.
2). the altitude height of site is ought to be less than 2000m
3). Flammable explosive and corrosive gas are forbidden in the work environment
4). The crane is forbid to lift molten metal, explosives, poison and corrosives

Feature of 360 degree floor mounted pedestal cranes

Quick and easy installation

Poured foundations can take up to a week to cure before

You can install the jib

Now there’s no waiting

Flexible for easy relocation

It’s easy to relocate a jib where there’s no poured foundation.

That means more flexibility in choosing initial jib location.

You can place it closer to machines or other obstructions, because

There is no need for a large square foot area for a concrete pour.

Safety feature of 360 degree floor mounted pedestal cranes

Weight overload protection device, Top quality long time bearing polyurethane materials buffer, Crane traveling limit switch, Voltage lower protection function, Emergency stop system, Current overload protection system and so on!

Girder of 360 degree floor mounted pedestal cranes

The crane girder is of welded girder construction. This result in lower dead weight with a high degree of vertical and

horizontal rigidity and small wheel loads being transmitted to the crane runway!

Design and construction rules of 360 degree floor mounted pedestal cranes

All the standards which are required for the crane are the International standard and Chinese standard.

Painting of 360 degree floor mounted pedestal cranes

Primer and finishing paint

Color: according to your demand.

Average thickness: about 100 microns.

light duty portal crane jib crane light duty portal crane jib crane

Rated Capacity	t	0.25	0.5	1	2	3	5
Beam length	mm	2000~6000
Lifting height	mm	2000~6000
Lifting speed	m/min	8; 8/0.8
Travelling speed	m/min	10; 20
Turning speed	r/min	0.76	0.69	0.6	0.53	0.48	0.46
Turning degree	degree	360°
Duty Class		A3
Power source		380V, 50HZ, 3 phase (or other standard)
Working temperature		-20~40°C
Control model		Pendant pushbutton control or remote control

360 degree floor mounted pedestal cranes Certificates

Main components of 360 degree floor mounted pedestal cranes

Package and delivery

customer visiting

Ordering notice:
Ordering or signing the contract customers must offer the basic parameters ,such as rated lifting weight, lifting height valid radius and so on ,So that supply the products fulfilled the requirement of work