3400W Hot air gun, hot air blower,hot air welding machine

Type: ZX-3400M

1 Leister heating element

2 Air volume :300L/min.

3 Air pressure:2600Pa

Leister heating element,hot air gun, plastic welding machine, Air heater,hotwind system

Specially use for welding kinds of plastic vessels . Also can be used for plastic molding ,dock operation ,etc.

In addition , it can also be used as hot source in industry .

Technical data

220V/50HZ/3400W

Welding temperature:20-650degree

Air pressure :2600pa

Air volume : 300L/Min.

N.W.:1.8KGS

Type: ZX3000

Technical specifications: 230 V / 3300 W

Hot wind temperature 20 ~ 650°C,continuously adjustable

Minimum air volume: 300 L/min

Diameter of Heater stainless steel pipe:Φ36

Diameter of Protective stainless steel:Φ43

Inlet:Φ19.5

Outlet:Φ22

Dimension: 225 x 70 x 58 mm

Total weight: 500g

Characteristics: SHGTZDH ZX3000 Hot wind heater

1. Electronic control temperature, temperature from normal temperature to 650°C which can be continuously adjusted.

2. Small volume, light weight, easy to install.

3. Matching with air supply equipment,it can be widely used in film shrink tunnel furnace, hose seals the tail machine, all kinds of dryer, non-woven fabrics in EVA membrane bonders, "heating assembly" of mechanical assembly equipment or the environment.

Parameters:

Blower type: ZX3000

Voltage: 220 ~ 230V, 120V

Frequency: 50/60 Hz

Power: 3000 ~ 3300W 2100W

Maximum temperature: 650°C

Minimum air volume: 300 L/min

Diameter of Heater stainless steel tube:Φ 36mm

Diameter of Protection stainless steel: Φ 43mm

Inlet:Φ 19.5mm

Outlet:Φ 22 .0mm

Total weight:500g

Size (L × W × H): 225 x 70 x 58mm

Measure point of Hot wind temperature is at 3mm from the outlet of Heater.Match with 3 meters before the inlet and adjust the blower to maximum air volume.