Home  >  Industrial Supplies  >  Air-Compressors

1.high pressure air compressor, 2.Engine: petrol engine, 3.Pressure: 200bar-330bar - details see: https://www.machineto.com/300bar-air-compressor-high-pressure-air-compressor-10210378

HL(Haolin) MCH 6 / SH Compressor is a kind of professional safety protection equipment, widely used in the fields of diving, fire fighting, oil field and etc. MCH-16/SH Standard has high quality, reliability and usability, and also its high speed of charging can meet the various needs of users. The output of compressed air reaches the criterion of EN12021.

HL6 series high pressure air compressor is the smallest, lightest portable breathing air compressor in the whole industry,

the petrol engine of HL6 series only 37 KG, can easily put it in the trunk of the car , carry to use the site.It can be

used in fire, scuba diving, shooting , emergency rescue, chemical, oil field and other fields, and has convenient to

move, easy operation, and the high pressure air compression manufacturing meet EN 12021 standard.

Product Structure:

Optional gasoline engine, three-phase, single-phase electric drive motor

Four cylinder level 4 high-pressure compressor

Stainless steel cooler between every level

Installed in the 400 bar high pressure on the compressor pressure gauge

1.2 meters high pressure air tube, joints according to the needs of you

Stainless steel fan cover

Two oil-water separator, two drain valve (optional automatic decontamination)

Activated carbon molecular sieve filtration system

To set pressure automatic stop, prevent the relief valve frequent rev. Jump, ensure safety and security

Charging rate:	100 L/min - 6 m³ /h - 3, 5 CFM
Filling time cylinder:	10 L - 0-200 Bar: 20 min
Working pressure:	225 Bar / 3300 Psi - 300 Bar / 4300 Psi
Driven by:	Honda Petrol Engine
Power:	3.6Kw / 5.5HP@3600RPM
Full load Amp:	11, 5 A (230 V - 50/60Hz) 6, 7 A (400 V - 50/60Hz)
Dimensions:	Height 35cm/13.7", width 78cm/25.5", depth 32cm/15.3"
Dry weight:	39 Kg / 85 lbs
Noise pressure:	83 dB
Number of stages and cylinders:	4
Lubricating oil capacity:	300 CC (0, 3 L) / 10 FL. OZ.
Lubricant:	ANDEROL 750
Frame:	Powder coated steel
Oil/mosture separator:	After last stage
Filtration:	Filter cartridge activated carbon and molecular sieve
Safety valve:	On the separator housing
Interstage coolers and after coolers:	Stainless steel
Suction filter:	2 micron paper - 25 micron polyester
Breathing air:	EN 12021 CGA E

Conventional wearing parts