Home  >  Food & Beverage Processing Machinery  >  Food & Beverage Machinery  >  Baking Equipment

(3 in 1)auto juice drinks making, 1.drinks making machinery, 2.Model:CGF18-18-63.Productivity:6000BPH, 4.Material:SUS304 - details see: https://www.machineto.com/3-in-1-auto-juice-drinks-making-machine-10000933

(3 in 1)auto juice drinks making machinery

Automatic juice beverage drinks filling machine 3-in-1

The machine is mainly used in the beverage filling operations.

The three functions of bottle wash, fill and seal are composed in one body of the machine.

The whole process is automatic.

The machine is used in filling juices, mineral water and purified water in bottles made of polyester and plastics.

The machine can also be used in hot filling if being installed with temperature controlling device.

The handle of the machine can be freely and conveniently turned to adjust the machine to fill various types of bottles.

The filling operation is faster and more stable because the micro pressure filling operation of the new type is adopted.

There the output and benefit of the machine is higher than the machines of the same specifications.

The advanced OMRON programmed controller (PLC) is adopted to control the machine to run automatically while a transducer is used in the bottle -entering chains to adjust speeds and coordinated with the transducer of the main machine to make the operations of moving bottle forward steadily and reliably.

It is convenient to operate with higher automation because every part of the machine is inspected to run with photo electricity, On the bases, the filling parts of the machine can be changed into filling methods of lower vacuum.

The filling category of lower vacuum (Z type machine) is applicable in glass bottles, filling alcohol, soy and such like materials.

The aluminum theft proof cap and plastic cap can be adopted.

The machine is an idea-preferred equipment for beverage makets.

Rinsing part

PET bottles infeed by combination of infeed grippers, equipped with bottle jam protection device, the machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck postion, avoiding bottle mouth thread comtamination caused by rubber gripper block of a traditional bottle clamp. This part is made of SUS 304 stainless steel, the bottle clamp is hygienic and durable.

The high efficiency atomizing spray nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
All sliding bushes of lifting device use anti-corrosion maintenance free bearing and the rinser is driven by driving system positioned inside machine frame via gear transmission.

Filling part

Rotary wheel fully made of stainless steel SUS 304

Gravity filling method

Filling valves aer reasonably structured with accurate filling.

Bottle go up and down in the function of cam through elevator to process filling with contact to bottle-mouth.

Level of cylinder is controlled with float-ball

Filler is driven through gears inside the machine frame.
Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck.

Capping part

Capper should have highest precision, influence very much with stability and realiable of the filling monoboc. Our capper

features as follows:

Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism.
Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute.
The capper is equipped with inlet bottle detection switch.
Centrifugal way of cap arranging is adopted to reduce damage of caps.
A cap inspection system is applied to control on-off of elevator.

Discharge starwheel & conveyor

Nylon starwheel and conveyor belt work together to discharge bottles, equipped with bottle jam protection device.

Driving motor is frequency inverted to synchronize with the filling line to prevent bottles from falling

Discharge conveyor is equipped with photocell switch to slow down and stop filling line in case of fallen bottles.

washing part filling part capping part