Home  >  Industrial Supplies  >  Industrial Air Conditioners

Air Conditioner, 1.Less dehumidifying comparing traditional aircon, 2.Flexible mounting design, 3.Completely safety protected - details see: https://www.machineto.com/230-v-ac-power-portable-air-conditioner-for-industrial-cabinet-10222769

PRODUCT INTRODUCTION

1) This series product can be widely deployed for enclosed area climate control such

like wireless communication cabinet, battery cabinet, Industry control cabinet etc.

2) The internal and external interface of product is IP 55 level protected to avoid

moisture, dust, water penetrating Into Inside of enclosure. Inside electronics

equipment Is completely well protected.

3) Applicable for severe ambient environment, such like high temperature, high

humidity, high corrosion atmosphere.

PRODUCT MODEL

product model
Items	Unit	Description	HRUC A 005	HRUC A 008	HRUC A 010	HRUC A 015
Cooling Capacity	W/	L35/L35@50Hz	500/1700	800/2700	1000/3400	1500/5100
	Btu/h	L35/L35@60Hz	NA	NA	1130/3850	1650/5600
Heater	W	Optiona	300,500		5,008,001,000
Air Flow	m3/h	Internal air flow	310	440	450	450
Temp.	ºc	Operating range	-40 → +55
Noise	dB(A)	5 m, away	60	60	61	61
Refrigerant			R134a
Dimension	mm	W×D×H	440*165*900		470*165*1170
Weight	Kg	Net Weight	27	32	38	38
Power consumption	W	L35/L35@230V/50Hz	360	500	540	570
		L35/L35@230V/60Hz	NA	NA	650	670
Voltage	V	Rated	230V±15%	230V±15%	230V±15%	230V±15%
Frequency	Hz	Rated	50	50	50/60	50/60

1. Less dehumidifying comparing traditional aircon.
2. Environmental friendly refrigerant such like R134A
3. Heat pressure smart control function to enable active cooling works In winter season
4. Completely safety protected accordingly UL, EN, CCC norms
5. Alarming output to monitoring system
6. Interchangeable and visual display service adapter
7. Automatic self start after power recovery
8. Remote control through RS485 comm. Port
9. Proper design for easily installation and service
10. Side/door mounting
11. Intelligent self testing function
12. Applicable for T3 condition

How to select right cooling capacity

Firstly below calculation need to be done before hand.

Q = Qi + Qr // Q: the total heat load of enclosure.

// Qi: equipment heat load,

// Qr: heat load penetrated through surrounding wall.

Qr = K (heat transfer coefficient) * A ( surrounding wall surface area) * Δ T ( Inside cabinet temp. - ambient temp.)

So the AirCon cooling capacity = 1.1 ( capacity margin factor, normally 10% more) * Q

*The Heating function selection

1. Normally heater need to have for cold area, the size of heater need to be considered per cabinet size, temp. level, site location

2. Normally the Inside temp. should be kept under 10 degree when selecting heater size

*Tips for Installation

1. When Install the product under severe condition like dusty, high temperature, please make sure the ambient temperature not

over 60 degree, and make sure clean product quarterly.

2. Make sure the external circle well ventilated, not been blocked by surrounding obstacles, make sure no air short cutting.

3. Make sure the product well mounted and attached on your enclosure, make sure sealing tight enough to avoid air leakage.

*Others

1. Tailor made design also available such like for ocean environment usage

2. Option items: Wireless connection module through GPRS, Ethernet access, MODBUS protocol communication

CONTACT

Name: Suzhou Huarui Thermal Control Technology Co.,Ltd
Add: Plant A2, No.2, Tian'e Dang Road, Wuzhong District,
Suzhou, Jiangsu province, P.R.of China
Code: 215104
Tel: +86 512 66570331/66570332-818 Fax: +86 512 68792690
web site: www.hauruicooling.com