Home  >  Industrial Supplies  >  Motors  >  Stepper Motor

23 BYG round small CNC stepper motor 23HM6602, 1) shaft diameter: 6.35mm, 2) holding torque: 0.9NM, 3) current: 3.0A, CE, ISO - details see: https://www.machineto.com/23-byg-round-small-cnc-stepper-motor-23hm6602-10239242

23 BYG round small CNC stepper motor 23HM6602 is a brushless, synchronous electrics motor that can divide a full rotation into a large number of steps. The motor's position can be controlled precisely, without any feedback mechanism.

23 BYG round small CNC stepper motor 23HM6602 Parameters:

Model	FHB57-51
Step Angle(°)	1.8
Length L(mm)	51
Holding torque(N.m)	0.72
Current (A/phase)	3.0
Resistance(Ω)	0.74
Inductance (mH)	0.9
Rotor inertia (g.cm2)	275
Weight (kg)	0.65
Step accuracy	5%
Temperature	80°C Max
Environmental temperature	-20°C ~ - +50 °C
Insulation resistance	100MΩ Min 500 V DC
Withstand voltage	500V AC 1minute

Features

1, Low noise and runs smoothly

2, High performance, low price

3, Provides 12/8 kinds of micro step selection,upmost micro step can be set to 200 x,enhance resolution

4, Special control circuit, greatly reduce noise, increase steadiness

5, Upmost response frequence amounts to 200Kpps

6, Once the pulse stops for 100ms,the phase current will automatically cut by half

7, Bipolar constant current chopper control

8, Photocoupler isolated input/output

9, Drive current range from 0.1A/phase~4.0A/phase

10, can match two phase hybrid step motors whose rated current under 4.0A 11, Single power input, voltage range from DC12-40V

12, Protection circuit , Overheat protection. Over current, under voltage protection

13, Small in size . compact driver, its dimension is only 25x136x92mm3.

14, Typical application Carve machine, laser labeling machine,laser internal carve machine.

Please contact with us for more detailed technical information.

We can design according to clients' requirements.