Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Carbonization Stove

carbonization furnace, 1:Reasonable price, 2. Reliable quality, 3. On time shipment - details see: https://www.machineto.com/2013-new-type-energy-saving-continuous-biomass-sawdust-coconut-shell-charcoal-wood-carbonization-furnace-0086-15838061759-10341237

newly large capacity Carbonizing kiln/carbonization kiln/Charcoal oven

newly large capacity Carbonizing kiln/carbonization kiln/Charcoal oven//0086-15838061759

Process:

1.One Carbonization Furnace could match with 2-3 inner pot to enlarge the capacity 2-3 times.

2.For each inner pot, from the briquette into charcoal, it takes about 6-8hours.

3.After carbonizing the first circle,the inner pots will put out and cooled outside. Then putting

another inner pots into the furnaces.

4.Only to ignite the first furnace, and the airflow produced by it will be enough to supply the next

furnaces. During this process, no smoke is released, and the hot air can use recycled which is a

good way to save time and energy.

5.And the furnaces are equipped with the lifting crane which can help you to put and discharge

the inner pots and charcoals easily. This is the largest capacity and new technology furnace for

briquettes.

4.This furnace is ideal equipment for wood briquettes to have anoxic distillation carbonization. Due to its rational structure

5.the furnace only needs small quality of heat consumption.

some questions:

ASK: 1. How does carbonization stove make charcoal?

Answer:

The surface of wood (bamboo, wood briquette, nut shell, etc) will ignite spontaneously

in the hypoxic condition. And this spontaneous combustion will produce heat. This

heat and the external heat source will heat the stove at the same time, when the

temperature reach 280 degree, the chemical structure of the wood will be changed by

the high-temperature, and after long time heating, changing and decomposing, then we will get

the black charcoal, combustible gas, and wood tar. This model furnace will use the

fume extraction tube to recycle all the combustible gas and smoking from the entire

heat source.

2.Why it is no pollution ?

Answer:

1. Smoking purification system are used for purify the smoking (can not burning) and

filter the wood tar. The smoking through the purification system will become water

vapor, and it will not pollute the air.

2. When during the process of carbonizing, there will be some smoke.(can be burning) the smoke can return to the furnace through tube for purifying, after

purification , the combustible smoking can be flow into the heating room of the main

furnace for heating the stove again,