Home  >  Construction Machinery  >  Building Material Machinery  >  Brick Making Machinery

1.Advanced technology with good price, 2.Reliable and stable maintenance, 3.Well after-sales service... - details see: https://www.machineto.com/2013-new-aac-block-machine-10076130

YP5-20Hollow Block Machine with length 18ins block

for Building Materials Manufacturer

We are a leading professional manufactuerer of Hollow block machine, block machinefor many years.

2013 New AAC Block Machine

AAC Block Production Line AAC is made from silicon material (silica sand, or recycled fly ash and silica gangue) and calcium material (lime, cement), mixing with foaming additive (aluminum powder), batching with water, the reaction between aluminum and concrete causes microscopic hydrogen bubbles to form, expanding the concrete to about five times its original volume. It is made into the multi-cells silicate products by the processes of resting, tilting, cutting and autoclaving.

First of all,close and match stored raw material

1.feed them into puring mixer

2.after evenly mixing

3.they poured in the mould to be reinforced by steel bars for slabs

4.After pre-curing under a certain tempreature for a period of time,the blank shall

havea certain of hardness.The mould and the blank shall be then hanged to the

cutting machinety by the tilting hanget to fulfil following actions titling the mould

90 in theair

5.One side plate of the mould become the blottom to support the blank until end

producer is handened

6.Hanged to the cart or the cutting support to open mould or demoulding

7.The demoulded trame and returned side plate shall be reoganized into the mould,

and shall be ready for next pouring after cleaning and oil spraying.

8. The blank then be cut on the cutting machinery in six sides

AAC Procedure: 1. All kinds of raw materials Reserve Wharf 2. Measuring and Batching 3. Add water to raw materials and stir the mixture 4. Mould ready 5. Casting 6. Pre-maintain 7. Out of Mould 8. Turnover and cutting 9. Grouping and sending into the autoclaves 10. Autoclaving in high temperature 11. Final products out of the autoclave 12.Test the final products 13. Packaging 14. Palletizing and storing 15. Delivery

We are always insisting on advance technology,clients first,keeping promise.Honest,hard-working,creating is our enterprise spiritual.We will try our best to create more benefits for clients from our reasonable price and good service.

Hope to cooperate with home and abroad clients and get win-win situation.

YP5-20 Hollow Block Machine:

Technical Name	Technical Specification
Frame dimensions(mm)	2875x1750x2600mm
Pallet size(mm)	1070 x 535 x 20mm
Vibration frequency(r/min)	1400-60700r/min
Host Power(kw)	30.0kw
Net weight(kg)	8,000kg
Cycle time(s)	15-25s
The way of Vibration	table mould resoance

Production Capacity ofYP5-20Block machine:

The production cycle time of theYP5-20is between 18 second without and 25 seconds with Face mix on regular Pavers production. This means with a production rate of 3 cycles per minute and 98 % efficiency the average output should be approx. 150 cycles per hour. Depend on the design and shape for the different pavers and Block, the actual hourly production capacity varies. However, please note that the machine speed will be lower with manual labour evolved and increase with more automation.

Pallets Size ofYP5-20 Block machine:

1070 x 535 x 20mm bamboo pallets with product height from 40-200mm.

YP5-20- QUALITY BLOCK MACHINE

The series of Block Shaping Machines, which meet the state standards of GBT8533-1998, are excellent in performance, high in efficiency, and lower in energy consumption. Since putting into the market, good economic profits and social benefits have been achieved. They are ideal equipment for high quality cement blocks. The products made by them can be piled up (3-5layers immediately after they are shaped.)

Main technology characters of Block Machine-YP5-20
1.PLC intelligent controller, and adoption data transfer device , control system with safe logic controller and fault diagnosis system and remote controlling system;
2.Original oil pressure valve is a manual vibration form, it can apply to make various brick type with vibration vigor and practical people, Do not need professionals to operate;

3.With the plus material feeding machine,the various color and volume block can be produced by the secondary stock distribution.
4.The machine can serves several purposes and can produce various specification cell bricks,cellular bricks,pavior bricks,all kinds of seeded bricks and storm bricks with different moulds;

5. The unique vibration form: It use computer to control the flow and pressure of hydraulic system. When pressured, transform the excessive oil into vibration force.

6. This machine could be used in many ways.

Main technology parameters of Block Machine-YP5-20

1.Total power :	25.35 KW
2.forming fashion:	table vibration, vibration and hydraulic formation
3.vibration frequency:	1400-6000 per/min
4.exciting force:	28 KN
5.main frame assemble size:	6600mm×9600mm
6.pallet specification:	1070mm×535mm×20mm (bamboo slab rubber)
7.factoy area:	4.5×8m
8.heap area:	2000-3000m2

Main accessories of Block Machine-YP5-20:

1.Main engine

2.Automatic computer control box

3.Dexter feeder

4.Brick receiver

5.Hydraulic Station,

6.Conveyor belt

China leader professional block machine factory!