Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Wood Debarker

debarker, 1.Use all around edge tool, easy to use, low cost., 2.High peeling clarity, high productivity, 3.small woodiness damag - details see: https://www.machineto.com/2013-kowloon-salable-wood-debarker-10351148

2013 kowloon salable wood debarker

1.Simply description:

Wood barking machine(wood peeling machine) belongs to one wood processing machinery
Wood barking machine consists of feed mechanism, discharge mechanism, disk, drive system, under bed and so on.

2.working principle:

Put logs, tree branches and wood into cylinder,close feed damper, start the machine, clockwise operation, material run with the machine operation in the cylinder, make the strip bar to wood skin peel off. Closed machien after fifteen minutes later, open feed damper, and then start the machine and counterclockwise run two minutes, peel good skin wood can automatically send out from cylinder. Peel net rate can reach 95%.

3.applicable scope:

Suitable for peeling processing of fresh cut soft wood and part of broadleaf timber for, also can complete part of frozen wood, dry wood peeling processing.

Peeling range	15-320mm
Peeling rate	summer95% ,winter80%
Wood loss rate	3%
wood maximum bending	8%
Power	7.5kwX2 3kwX1
Discharge mode	Automatic

Model	Power(kw)	Capacity(t)	Spindle speed(r/min)	Operator	Overall sizes(m)
6800mm	15	3-8	150	2-3	6.8*1.45*1.7
Double-shaft6800mm	7.5*2	4-9	173	2-3	8.8*1.2*1.6
12000 mm	22	6-10	150	2-3	12*2*2.2