Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mineral Separator

Easy mounting and dismantling, Large processing capacity, Fine classifying grain size, Enviroment protec - details see: https://www.machineto.com/2013-hot-sell-on-hydro-cyclone-price-10315178

Hydro cyclone

introduction

A hydrocyclone is mainlyused in mineral processing industry classification, sorting, concentration and off the mud. When used as a hydro cyclone classification device, consisting mainly used with mill grinding and classification systems; as mud off device, can be used for re-election plant Desliming

2 hydro cyclonehas no moving parts, simple structure; unit volume large production capacity, accounting for the small size; classification efficiency (up to 80% ~ 90%), grade fine granularity; low cost, less material consumption.

(3)Cone angle: larger cone angle, grading granularity thicker, reducing the cone angle, grading granularity becomes thin. General classification of fine grade materials, the use of smaller cyclone cone angle, usually take 10 ~ 15 °; coarse classification and concentration generally used with larger cyclone cone angle, typically between 20 to 45 °.

(4) an overflow pipe diameter: larger diameter overflow pipe, overflow traffic increases, coarsening overflow, underflow fine grade reduction underflow density increases.

(1) Feed pressure: cyclone feed pressure is the important parameter.Improve feeding pressure, slurry flow rate can be increased, the centrifugal force increases suffered material can improve classification efficiency and underflow concentration.

Hydro cyclone due to its simple structure, easy to manufacture, processing capacity, has been widely used at home and abroad.Its main drawback is the large power consumption, and in severe wear at high pressure to mine. Adopt new wear-resistant materials, such as carbide, silicon carbide and other production Spigot and wear parts to the mine mouth can partially solve this problem, in addition, when used in closed-circuit grinding of grading.

features

♣low equipment cost, ♣easy mounting and dismantling,

♣convenient maintenance, ♣small floor space required,

♣low capital expenditure, ♣large processing capacity of unit volume,

♣fine classifying grain size, ♣high classifying efficiency,

♣small quantity and short time of staying of the ore pulp in the cyclone,

♣ easy operstion of shutdown.

Notes for selection

1 We can carry out non-standard design and production as required by the customer.

2 polyurethane,steel casing lined with polyurethane,wear resistant rubber,KM com-pound material,silicin carbide,alumina ceramics,and high chrome alloy

Hydro cyclone technical data

Specif ication	Internal Dia (mm)	Intel Dia (mm)	Overflow Dia (mm)	Underflow Dia (mm)	Cone Angle (.)	Maximum Feed dia (mm)	Feed Pressure (Mpa)	Capacity (m3/h)	Cutsize (um)	Outlizesize(mm) (L*W*H)	Weight (kg)
FX-660	660	187,167	180	80,110,150	20	16	0.03-0.4	250-360	74-220	1215*850*2720	950
FX-350	350	80	80,90	30,35,40	20	6	0.03-0.4	60-105	50-150	530*431*1411	155
FX-200	200	48	40,50	16,20,24	15	2	0.05-0.4	25-40	30-100	320*307*1114	64
FX-10	10	2	2,3,4	1,2	4	0.1	0.1-0.1	0.05-0.1	1-5	60*34*140	0.5