Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Mortar Spray Machines

UT50-40 Pump for Mortar:, 1.convenient maintenance, 2.high working pressure, 3. high efficiency, 4 diesel engine - details see: https://www.machineto.com/2013-hot-sale-ut50-40-diesel-pump-for-mortar-10110289

2013 Hot Sale UT50-40 Pump for Mortar

Introduction of UT50-40 Pump for Mortar

UT50/40 MORTAR PUMP is widely used not only for grouting cement mortar and sand mortar, combined with accessories such as compressor and spraying gun, it is also ideal equipment applied in spraying. It is widely used for grouting in mine gallery, rail and road tunnel, hydropower construction, slope consolidation, underground engineering, subway and civil engineering etc.

Working Principle of UT50-40 Pump for Mortar

Diesel engine drives the crankcase which can change the circle movement to line movement through three V belt, with the act of the crank, the cross piston connected with the end of connecting rod do the reciprocate and make the piston in the working cylinder connected with it trough the piton rod do the synchro movement. As the pistons reciprocate, the materials are continually sucked from the inlet and discharged from the outlet. The pressure indicator fitted on the top of pump head can inspect the conveying pressure.

Main Specification of UT50-40 Pump for Mortar

Pressure	4 Mpa
Output	50L/min
Max. Aggregate	6mm
Inlet Hose ID	75mm
Outlet Hose ID	38mm
Piston Speed	95 times/min
Working Cylinder ID	90mm
Stroke	85mm
Diesel Power	10 HP
Overall Dimension	2100x800x1100mm
Weight	450kg

Required Mortor Ratio:

The workable mortar should select middle sand, which the quantity of 1 mm sand by weight is 60 percent of the total sand. And max. sand grain is less than 5mm with fineness modulus>2.3. For the workable mortar, please refer to the following table:

Cement Sand Ratio	1:2.5 (volume) or 1:3.24 (weight)
Name	Volume (M3)	Weight (T)
Cement	0.3664	0.4376
Dry Sand	0.916	1.4198
Water	0.347	0.347