2013 Hot Sale Hoist - 220V Wire Rope Electric Hoist

2. Read fruther on this page to learn more about the most popular type - CD/MD wire rope electric hoist.

3. If you need other type electric hoist, please tell us, we will be pleased to be of further assistance!

CD1 electric hoist has only normal speed, which can satisfy the general working requirement.
MD1 electric hoist has one more hoisting motor and one slow speed actuating device, which make the
model have two speeds. When it works slowly, it can satisfy the precise task such as precise working of
loading and unloading, sand to break-in.

2. Applications

It can travel rotation through the trolley hanging on the I-steel, and install on the single beam crane, gantry crane, jib crane and overhang crane to rise and fall the cargos.

So it can be used in factories, mines, wharf, warehouse, freight yards, and shops and so on which need lifting equipment for lifting heavy objects. Such as mining companies and railways, docks, warehouses.
It is prohibited to manned.

3. Components

Motor:Hoist Motor is an taper type rotor motor with braking,it is made by Nanjing special motor factory,it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently

Trolley :It is assembled and has running wheels. Herein, the runner wheels are mounted on top-class sealed ball bearings.

Gear Box:Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings , to ensure smooth, low-friction operation.

Wire Rope:Hoisting rope comply with the exporting ISO standards. The leading rope taken by the Drum, does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.

Rope Drum:Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.

Electric control system:Model CD1 and MD1 is composed of the contactor box,controlling switch,cut-off limiter.the working voltage of controlling switch is 380V,36V or 24V(safety voltage).

Rope Guide:Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition.

Hook:The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting .

Testing:All our Hoists are tested on 125 % thus assuring safe working load and is issued with a test certificate.

Model

CD1/MD1

Capacity (t)

0.5

1

2

3

5

10

16

20

Height (m)

3- 9

6- 30

6- 30

6- 30

6- 30

9- 30

9- 18

9- 18

Lift speed(m/min)

8, 0.8/8

7, 0.7/7

3.5, 0.35/3.5

4

Travel speed(m/min)

20/30

20

20

Wire

Rope

4.8

7.7

11

11

15

15

17.5

24

6 x 37 + 1

Travel rail

16-28b

16-28b

20a-32c

20a-32c

25a-45c

32b-63c

45b-63c

56b-63c

Lift motor

0.8, 0.2/0.8

1.5, 0.2/1.5

3.0, 0.4/3.0

4.5, 0.4/4.5

7.5, 0.8/7.5

13, 1.5/13

13, 1.5/13

18.5

1380r/min

Travel

motor

0.2

0.2

0.4

0.4

0.8

0.8x2

1380r/min

Joint number (times)

120

Work duty

Middle FC= 25%

Power

380V, 50Hz, 3-Phase

Weight (kg)

10%(+ /-)

44-46

121-130

137-220

221-353

281-450

440-726

1050-1450

1130-1286

//

138-147

164-247

256-388

310-480

530-780

1100-1500

1220-1376

1. Weight overload protection device:If the material is over the capacity, the crane will give a sharp warning for protection itself.
2. LIMIT SWITCHES :- To prevent over hoisting & over lowering of hook.
3. Voltage lower protection function,
4. Emergency stop system:If the operation staff encounter some emergency situation, we could start the emergency brake system to protection the related treasure.
5. All our Hoists are tested on 125 % thus assuring safe working load and is issued with a test certificate.

CE

NO. T120112/HXK032

Expired Date: 2049/12/31

CE

NO. T120112/HXK033

Expired Date: 2049/12/31

ISO9001-2008

NO. CN-CQM11Q11755ROM

Expired Date: 2016/6/10

Manufacture license of special equipment PRC

Expired Date: 2014/5/4

1, One year warranty for whole machines.
2, Providing free quick-wear part.
3, Low charge for continue maintenance when warranty is expired.
4, Exclusive engineer support at any time.
5, We can provide free training to end-users.