Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Welding Equipment  >  Plastic Welders

Place of Origin: Zhejiang China (Mainland) Brand Name:KW Model Number: 504, Voltage: 220V Power:1500W Frequency: 50HZ - details see: https://www.machineto.com/2013-high-quality-ppr-welding-machine-new-machine-10139352

Specifications

This product has a precise temperature control, high reliability, security, and unique non-stick plastic mold technology, user-f

Conditions of use: altitude over 1000 meters
Ambient humidity: -20 °C -50 °C
Relative Humidity: 45% -95%
Voltage Range: AC 176V-245V
50 ± 1Hz
2, the heating head temperature: 260 ± 5 ° C
Safety indicators: the insulation resistance of not less than 1MΩ
Leakage current: ≤ 5mA (AC RMS)
Second, the use of
A fixed welding device installation heating ends, the weld is placed in the rack corresponds to the installation in accordance with the required pipe size increases
Hot die, pull tight and Hexagon, generally small in the front-end in the back-end.
2, power on
Power (note that power with ground fault protection line), green light, until the green light goes out, the red light. Said welding device to enter the state of the automatic temperature control, you can begin operating. Note: The automatic temperature control, state, red and green alternately lit, welding in a controlled state, does not affect the operation.
3, weld pipe
Vertical cut with tube cutter pipe, pipes and fittings for non-rotating propulsion welding device die and the table below to operate. Immediately after the heating time is reached, pipe and tube from the die head removed quickly without rotating a straight line inserted to the desired depth, uniform flange joints.

Third, pay attention
1, the three-pole single-phase safety flat plug, the user may not tampering plug must be used to plug into the socket with ground wire.
2, during use, hand and combustibles can not be touched part of the heating plate to avoid accidents.
3, the non-professionals may not be open, to the safety of electric shock and damage the instrument performance.
4, such as red, the green light for long periods of time hopping, the instrument has failed, should immediately stop the work, and cut off the power.
5, the day of purchase of the welding device warranty for three months (die, packaging boxes, and except artificial damage)
Welding device factory temperature has been adjusted, non-professionals are not free to adjust, so as not to affect the normal use of the welding device and life.