Home  >  Chemical Process Machinery  >  Granulators

compound fertilizer granulator plant, 1. material can be urea, map,mkp,nop .., 2.low malfunction rate, 3.low price,high quality - details see: https://www.machineto.com/2013-china-ce-approved-compound-fertilizer-granulator-plant-10298878

Compound Fertilizer Granulating Equipment Introduction:

The new generation of compound fertilizer which self-developed and applied the lastest unique manufacturing process---granulated one time and the capacity range 1-70t/h. This equipment select high quality,anti-corrosion & wear-resistant materials.So it will be long life-span.Advanced technology contribute to the high rate of granulating.

The whole line flow chart :

Client's biggest concern question and answer:

1) How you guarantee to mix and feed the material evenly into the machine?

The material feedinto the bunkers, then belt weighers at the bottom of the bunkers weigh each kind of the material and transport it into the mixer, after mixing the material, the material was feed into the next machine. The kinds of the material determine how many bunkers to be used.

2) How to handle while the material stick on the machine?

Take dryer for example, therewill be install balls on the inwall of the dryer, while working, the ball impact the inwall of the dryer, then the material will be shaking off.

3) The comparsion of the disc granulator and the rotary drun granulator

They are both the best seller products, the biggest differences is that the capacity of therotary drum granulator is bigger.

4) How to solve the problem of the material corrode the machine, especially the acid material?

The part of the machine which contact with the material will use stainless steel , also, the painting use good quality, such as lead oxide paint , iron oxide red( the inner paint) .

5) How about the automatic control system of the whole line?

Based on the customer needs, we can provide PLC control system, which will save cost , as well as improve the products quality.

6) How to control the temperature while drying the fertilizer? How about the air inlet temperature and the air outlet temperature? Dose it needheatinsulationcotton?

We have temperature control system, the temperature will control at the standard temperature.

Air inlet temperature is about 170°C-200 °C , and the outlet air temperature is about 90 °C -100 °C. Also it depends which heat resources you use. The heat insulation cotton is need not in the common temperature environment..

Pellet making machine application:

Disc pelletizer is mainly used in low/medium content of compound fertilizer production and granulation of organic/inorganic compound fertilizer or single-quality fertilizer.

The raw materials to make fertilizer are:

1. Agricultural waste: straw, dregs of beans, cotton dregs, rice bran,etc.

2. Animal manure: mixture of poultry litter (PL) and animal waste(AW),such as,Slaughterhouse Waste,Fish Market,Urine and dung of cattle,Pigs,Sheep,Chicken, Ducks, Geese,Goat.etc.
3.Industrial waste: wine lees, vinegar residue, manioc waste, sugar scum, furfural residue etc.

4. Home scrap: food waste, bones, the roots and leaves of vegetables, etc.

5. Sludge: the sludge of the river, the sewer, etc.

Main technical parameters of pellet making machine

Model	Disc diameter (mm)	Disc edge height (mm)	Volume (m3)	Rotation speed r/min	Motor power (kw)	Capacity(T/h)
ZL25	2500	500	2.5	13.6	7.5	1-1.5
ZL28	2800	600	3.7	13.6	11	1-2.5
ZL30	3000	600	4.2	13.6	11	2-3
ZL32	3200	600	4.8	13.6	11	2-3.5
ZL45	4500	600		12.28	37	10

Contact with Ms Claire Feng

Mobile: 0086+15038349509

Skype: claire77524

Quotation will be quickly provided if your enquiry contains:

1 the capacity you want to reach

2 the raw material size and final products size

3 Which machine you want to buy

4 your production purpose, the fertilizer you produce for where to use