2013 Best-Selling Dryer Impeccable After-sale Service Wood Dryer
Condition:New | Type:Rotary Drying Equipment | Place of Origin:Henan China (Mainland) | Brand Name:Guoxin |
Model Number:GX--1.8x16m | Voltage:custom made according to your voltage | Power(W):4000-37000 | Dimension(L*W*H):16m*1.8m(length * diameter) |
Weight:35.3 ton | Certification:OEM, CE | Warranty:1 year | After-sales Service Provided:Engineers available to service machinery overseas |
Main reducer Ratio:31.5 | Running speed:3-8r/min | Production capacity:1~15t/h | Material:bolier plate,stainless etc. |
Gradient:3%-5% | Installation:offer technical support | Moisture of output:≤8% | Applications:chicken manure, organic fertilizer, dryer machine |
Small Investment, High Output Wood Dryer
I. The composition of wood dryer
1.Dryer cylinder 2.Roller ring 3.Big gear 4.Small gear 5.Carrier roller 6.Bearing box 7.Roller carrier shaft 8.Spring plate 9.Cushion block of roller ring 10. Transmission shaft 11. Pedestal of Carrier roller
12. Transmission pedestal 13. Coupler 14.Reducer 15.Discharge device 16.Feeding device
17.Motor 18.Bearings 19. Cyclone 20.Fan 21.Connecting pipeline
II. A Good Choice Drying System Furnace Heater for Wood Dryer
1. The composes of stove:
This stove made of burning furnace, heat exchanger, bottom blower, flue gas circulating fan, hot air blower, flue gas draft fan, bath precipitators, flue and chimney, etc.
2. The main feature of it:
- Heat exchanger and burner design all in one machine structure, easy to install.
- Before and after the heat exchanger, the combustion furnace disposed intermediate and steering flue, the heat exchanger is not directly heated by the high temperature of the flame, extended service life.
- The reasonable design inside the heat exchanger the flue gas flow rate and air flow rate, Flue gas in the colling process, the large volume change, the flue gas flow rate control in a reasonable range, both higher heat transfer effects cited wind resistance and avoid too large wind, resulting in a positive pressure combustion and therefore changer the heat transfer surface of the heat pipe root number designed for a different quantity, the flue gas flow rate is always in a reasonable of values.
III. Technical Parameter of Wood Dryer
Model | Main reducer | Speed (r/min) | Production capacity (t/h) | Power (kw) | Volume(m3) | Weight (t) | |
Model | Ratio | ||||||
Φ1.0X10 | JZQ450-16-11 | 6.73 | 1-3.8 | 5.5 | 7.85 | 7.5 | |
Φ1.2X12 | ZL50-16-1 | 5.8 | 1.8-5.5 | 11 | 13.31 | 13.8 | |
Φ1.5X12 | JZQ500-111-2F | 16.46 | 4.8 | 4-9 | 15 | 21.2 | 22.3 |
Φ1.5X 15 | ZQ50-1611-2 | 16.46 | 4.8 | 4-10 | 18.5 | 26.5 | 28.8 |
Φ1.8X14 | JZQ650-111 | 18.84 | 3.2 | 6-12 | 30 | 48.22 | 39.8 |
Φ2.2X18 | JZQ750-111 | 31.5 | 3 | 10-25 | 37 | 70.43 | 53.3 |
Φ2.4X20 | ZL85-13-1 | 27.16 | 2.83 | 20-40 | 45 | 90.43 | 78.4 |
IV. Technology Express for wood dryer
1. What to do if the wet materials won't be dried?
First, detection the quantity of heat, in most cases, the heat stove can't provide enough heat resource to rotary dryer. And then increase heat input according temperature display.
2. What about the discharged speed low?
One side, the rotary dryer's tilt angle is not reasonable; on the other hand, internal structure optimization is not enough. Our engineer Mr.Xu will give you the valuable suggestions in your working site.
No matter what problems you meet during production, we will offer you rapid professional solutions
V. Technical Guidance for Wood Dryer
Now, dryer is widely used in many industries with the development of society. So there are many question during purchasing rotary dryer, we will offer you some suggestions.
1. How do you choose the appropriate wood dryer for your raw material?
Guoxin engineer from technical division suggest you to collect some data about the raw material's moisture, the size of working site etc. And you should make further discussion with supplyer, thus manufacturer will produce dryer according to your requirement.
2. If the area of work-site can have an effect on installation of equipment?
Guoxin Answer: At first, measuring the size of area is important, we will set the equipment according to practical situation. Maybe seting up some devices to saving space.
3. How to choose the suitable manurfacturer?
Guoxin Answer: When you purchase wood dryer, it would be better if this manufacturer is professional factory which is specialized in wood dryer. Thus they will offer professional after-sale service, including general assembly drawing, foundation diagram, site planning, equipment layout, machine installation, test running machine, technical training...
Welcome To Contact Us Anytime.
Packaging Detail:Export standard container, in bulk or as your options |
Delivery Detail:In Stock, if special requirements within 19~25 working days |