2012 Advanced Light Weightlesss AAC Block Production Line

1: 4.2m, 4.8m, and 6m Mould, 2: Light weight brick machine, 3:Moulding period:5-6mins, 4: Thinckness of autoclave :10mm - details see: https://www.machineto.com/2012-advanced-light-weightlesss-aac-block-production-line-10076085

Condition:New	Type:AAC Brick Machinery	Brick Raw Material:Fly Ash	Processing:Brick Cutting Machine
Method:Hydraulic Pressure	Automatic:Yes	Capacity:50000-450000m3/year,50000-350000m3/year	Place of Origin:Jiangsu China (Mainland)
Brand Name:Success	Model Number:Success-1	Power:22.4kW	After-sales Service Provided:Engineers available to service machinery overseas
Automation Degree:Semi/Full automation	Raw material::Sand/Fly ash, Lime, Cement

2012 Advanced Light Weightlesss AAC Block Production Line

contact supplier for 2012 Advanced Light Weightlesss AAC Block Production Line

AAC Production line Plant
from 50,000m3 to 300,000 m3 per year
high quality equipments
professional manufacturer
good services

Autoclaved Aerated Concrete Production Line

The aerocrete produces the technological process:
1. The raw materials store in the material storehouse (or stores the pot) after dealing with reserve such as lime, cement, gypsum, sand (or fly ash)
2. Aluminum powder or aluminum lotion is through dealing with the reserve material for use
3. Raw materials measure according to certain matching by electron balance measure, aluminum powder, water put into aluminum powder mixer is it is it suspend the liquid to make to mix after measuring
4. The batching water (cold water or hot water pitcher hot water) is measured by the electronic water balance
5. Put into and pour among the mixers in certain order after, raw materials, aluminum powder suspend the liquid is measured, pour and enter the mould after mixing evenly (panel should be put network slice of reinforcing bar in advance in the mould)
6. Quiet to is it raise in advance to park through certain temperature and time, is it transport to the cutting machine to hang from upset hoist upset 90° after the base body reaches certain intensity, the drawing of patterns is cut
a. The base body carries on the side and cuts and mills the trough vertically
at first
b. Then carry on the vertical level to cut
c. Cut horizontally finally
d. Cut good base body, raises to cauldron car go on one yard of shelves organize into groups to steam to transport to hang to drive a vehicle to load
7. Raise products well, produce after the cauldron breaking the board off with the fingers and thumb by the board breaking off with the fingers and thumb machine to steam
8. Pile from finished product hoist or forklift to finished product field pile the buttress according to specification to carry
9. Steaming and raising the car and side board and entering the next board of circulation and returning after, the finished product is unloaded, with upset hoist mould frame association that drawing of patterns get off, restore 90°return to pour mixer pour again after clearing up

Service

1.Production Line Design.
Including: drawing of plant working process , drawings of land construction, drawings of power working, drawings of driving force for working, drawings of anti-dust, drawings of water supply and drainage, and drawing of air pipeline construction.
2.Technical Guidance of Building Factory
Including: consultation of facility, Equipment installation guide, constitution the production preparation, etc.
3.Providing the technical information of setting up factory
Including: part of the factory management system, all posts accountability of production line, process rules, safety rules, setting a quota of staff and posts, pre-production tools directory, laboratory instruments, product catalogs, and test methods.

Contract Information:

Mobile: 86-18961187950