2011 hot sell 2 roller rebar cold rolling machine

rebar cold rolling machine, 1)make different specification rebar, 2)material:hot rolled wire steel rod, 3)high efficiency - details see: https://www.machineto.com/2011-hot-sell-2-roller-rebar-cold-rolling-machine-10131457

Place of Origin:Henan China (Mainland)	Brand Name:JINSHAN	Model Number:LLZ14.C	Condition:New
machine type:cold rolling machine	raw material:wire steel rod 6-14mm	final product:deformed bar 5-12mm	color:green or according to the client request
rolling speed:max 3m/s and speed can be adjusted

2011hot sell 2 roller rebar cold rolling machine

utility:

This kind of 2 roller cold rolling machine is used tomaking different specification rebar.

working principle of cold rolling machine:

First reduces the diameter of the hot rolled wire steel bars, and then makes ribs on bars by cold rolling mill.

The milling machine can make the steel barHRB335,HRB400 and HRB500as your requirement. The final productions are 2 ribbed rebar or 3 ribbed rebar.

specifications:

small type (mean the inlet diameter below dia10mm) ,

medium-sized (mean the inlet diameter below dia12mm),

large type (mean the inlet diameter below dia14mm)of cold rolling machines.

the parameter of cold rolling machine:

Project	Technical parameter	Unit	Supplementary details
Raw material	dia 6-14	mm
Roller diameter	Φ228	mm	Special-purpose alloy
Equipped with power	75	KW	YVP200-4 variable-frequency Variable-speed motor
Gear center distance	228	mm	Herringbone gear
Rolling line speed	max3	M/s
Sheared length	1-12	m
Flying shear	5.5	KW
Product specification	dia 5-12	mm
Output	0.83-7.99	T/hour

The whole set of cold rolling machines including:

1. Pay-off machine

2. Dephosphorization (detach the scale) and sinking mill (the first time to roll) at the first time

3. Rolling mill

4. Straightening machine

5. Heat treatment (in consideration of you need a low strength close to 500 MPA, we add this machine to strengthen the steel extensibility)

6. Cutting machine (the cutting length on the basis of your set , its speed 1.5-3m/s,it can cut below 12mm or 10mm reinforced steel bar, the final production in line shape)

Or wire re-winding machine (the final productions are in circular shape)

7. Flick rack (most of them we have sold are 9 meters or 12 meters long, of course we can produce according to your requirement). Its automatic, the power is1.5 KW.

8 Synthetically control panel.

The line speed can be 3m/s.

automatic:

This set of machine is automatic, only need two or three man, one is to control the synthetically control panel, the second is to weld steel coil and bundle the final productions.

final product:

The final product are 2 ribs or 3 ribs deformed steel bar in circular shape or in line shape.