Home  >  Industrial Supplies  >  Machinery Engines

1) 4105ZG machinery Engine, 2) 75kw, 4 cylinder, water cooled@2200RPM, 3) with shaft 113mm,diameter75mm,key18mm, 4) CE/ISO - details see: https://www.machineto.com/2000rpm-hf4105zg-machinery-engines-with-output-shaft-10233269

OUR ADVANTAGE

Professional diesel engine manufacturer, not simply assembler or trader

Decades’ years of manufacturing and exporting experience

Adopt International quality standards, to meet high quality requirement

Good reputation for Reliable quality & Reasonable price

Strong technical support

Advanced production line with skilled workers

SALES PROMISE

Huayuanpower provides a full line of brand new and high quality products. Each and every unit is strictly factory tested before shipment.

Quality warranty is according to our standard conditions: 12 months from date of bill of lading or 1000 hours of running, whichever comes first.

USER'S NOTICE

a. Please use the engine oil ,diesel and cooling water under manual’s request and check the engine oil height before start up the diesel engine(between up and low reticle of dipstick).

b.Fach start up should be in 10 seconds and don’t start up more than 3 times at least should be more than 2 minutes,and thereis 3-5 minutes to idle speed after start up.Clutch can’t grind in separately.

c. If there are “winter”and “summer” two switches,you should match it with cooler,and when it is summer,the switch should tum to “summer”and vice versa.

d. Please discharge the water of water box,engine body and cooler after usage in winter.

f. Please read manual in details before usage.

*Pls note we can produce the goods as customer's demand.The price will be muc more cheaper if large quantity.

MACHINERY ENGINE SPECIFICATION

The main technical parameters of HF4105ZG diesel engine

Engine Model	HF4105ZG
Manufacturer	Weifang Huayuan Diesel Engine Manufacture Co., Ltd
Brand	HUAFA
Type	Four stroke, in line, water cooled
Rating power(kw)	75
Engine Speed(rpm)	2000
Bore*stroke(mm)	105*125
Number of cylinders	4
Air input mode	Turbocharged
Compression ratio	17:1
Fuel consumption	≤224g/kw.h
Oil consumption	≤2.32g/kw.h
Speed regulator	Mechanical
Starting method	Electric starting, 24V
Cooling method	Forced water cooled
Lubrication method	Pressure & splash lubricating
Exhaust gas temperature	≤470°C
Net weight	500kgs
Application	water pump set

FACTORY SHOW

MACHINERY ENGINE PRODUCTION LINE

CERTIFICATES

MACHINERY ENGINE CONFIGRATION

MACHINERY ENGINE SHOW