Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Wood Shaving Machines

Hammer mill- SG series, Be suitable for kinds of wood pieces, Big capacity,High efficiency, CE certificate, ISO9001-2008 - details see: https://www.machineto.com/2000kg-h-electric-hammer-mills-for-wood-shaving-10355876

Electric hammersof 40,50,60,65 type are special products. It is the most ideal grinding equipment of all kinds of stalk, weed, corn, soybean, PVC foaming board, rubber, and etc. Structure reasonable, firm durable, safe reliable, easy operation, the vibration small, and the efficiency is high. It is widely used in the professions such as fodder factory, cultivation factory, organic fertilizer factory, Chinese medicine, chemical industry and so on.

Technical Parameter:

Model	SG40	SG50	SG65*27	SG65*55	SG65*75
Diameter of rotor(mm)	400	500	600	650	650
Width of studio(mm)	205	275	275	550	750
Rotate speed (r/min)	3400	3100	2950	2950	2950
spec of screener (mm)	675×200	750×270	940×270	540×1020	740×1020
Linear Velocity	71 m/s	81 m/s	92 m/s	100 m/s	100 m/s
Spec of hammer (mm)	120×40×4	180×50×5	180×50×5	180×50×5	180×50×5
Hammer qty (pieces)	4×3=(12)	4×4=(16)	6×6=(36)	6×8=(48)	6×12=(72)
Related power (kW)	7.5	15	22	37/55	55/75
Model of bearings	1307	1310	2315	2316	2316
Wind absorbed quantity(m/min)	5	11	18	22/25	33/38
Weight (kg)	90	180	280	1200	1500

Raw material	Holes of screener(mm)	Capacity(T/h)
		SG- 40	SG -50	SG -65*27	SG -65×55	SG -65×75
Stalk	6	0.2-0.5	0.6-0.8	0.8-1.5	1-2	2-2.5
Corn	3	0.8	1.2	1.5	2-4	3-5

Note: This parameter is got on the condition of well installation, air-inhaling and work normally.

The component of raw material is not bigger than 14%, the rate of opening holes is below 33%.

if you are in need of good hammer mill, please do not hesitate to contact us.

We are confident that the truth will prove that we will be your best choice.

Best Regard

sandy

Tel 0086-18678866216

Fax 0086-531-83483378