20 years manufacturer molybdenum disilicide mosi2 heating element

1.mosi2 heating element, 2.Straight,U,W,L type mosi2 heatig element, 3.20 years manufacturer, 4.mosi2 raw material, 5.ISO 9001 - details see: https://www.machineto.com/20-years-manufacturer-molybdenum-disilicide-mosi2-heating-element-10245487

Condition:New	Type:furnace heater,Straight,U,W,UL,WL type mosi2 heating element	Power Source:Electric	Place of Origin:Henan China (Mainland)
Brand Name:Yuhao	Model Number:YH-MoSi2-U,W	Dimension(LWH):customizable	Weight:all depends
Voltage:all depends	Power(W):all depends	Certification:ISO 9001:2008	After-sales Service Provided:Engineers available to service machinery overseas
Color:grey	Material:Molybdenum disilicide mosi2	Long time usage:working continuously	Working temp:500-1700 celsius
Usage:high temperature electric furnace heating	Service:provide technical support and after-sale service	Porosity:7.40%	Bending strength:15-25kg/cm2
Diameter:3/6,4/7,4/9,6/12,9/18,10/18

The General Descrioition Of MoSi2 heating element

1. MoSi2 heating element is a kind of resistance heating element basically made of high pure Molybdenum Disilicide.

2. In oxidizing atmosphere, its Max temperature can reach 1800 deg.C, and its applicable temperature is 500~1700 deg.C.

3. It can be widely used in such applications as sintering and heating treating of ceramic, magnet ,glass, metallurgy ,refractory, ect.

4.physical property

volume density	5.5~5.6g/cm³	bend strength	5.5~25kg/cm²
vickers-hardness	(hv)570kg/mm²	porosity rate	7.4%
water absortion	1.2%	hot extensiblity	4%

5.Recommend surface load:

Furnace Temp(°c)	1400	1500	1600	1650	1700
Surface looad of hot zone(W/cm²)	<18	<15	<12	<10	<8

Installation of Elements

1)Vertically hanging

Under normal temperature, MoSi2 element is very brittleness,while under high temperature it is plasticity.So,the better way for installation if the U Shape element is to hang it vertically,to the furnace top through the support clamping chuck H.The aim of such way is to avoid putting the mechanical stress directly to the element heat-generating end ,or the element will easily be broken.

2)Support clamp

Support clamp are applied to 9/18 and 6/12 two kinds of elements respectively. the support clamp supports the whole weight of the element and the position of the element is also determined by it .therefore ,it must be installed carefully to assure that the element it vertically hung.in order to prevent the element from being over heated locally,the taper part of the element lower end must put into the furnace chamber.

When you enquiry, please tell us the following data:

(1) Diameter: D1/D2, mm/mm

(2) Hot zone length: Le, mm

(3)Code Zone length: Lu, mm

(4) Shank Spacing: A, mm

Any further question, pls feel free to tell us, and we are very glad to be at your service!

Packaging Detail:wooden box outside package, protective material and carton inside package

Delivery Detail:3-7 days after receiving payment