Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Cranes  >  Gantry Cranes

2 ton ~10 ton single girder Semi Gantry Crane, single beam half gantry crane, Used for warehoise or plant, Light type,sinple des - details see: https://www.machineto.com/2-ton-10-ton-single-girder-semi-gantry-crane-single-beam-half-gantry-crane-10100103

2 ton ~10 ton single girder Semi Gantry Crane, single beam gantry crane

Semi gantry crane:

can use it warehouse , outdoor or indoor

1)span:6.5-22.5m

2)capacity:1-16t

This model crane mainly consists of main girder, single leg, end girder traveling mechanism, winch trolley and electrical appliances. They are applicable to the transfer, assembly, check and repair as well as load and unload at mechanic processing workshop, subsidiary workshop of machinery mills, warehouse, in light textiles or food industry.

Compared with LH model, the trolley and crane driving system is designed to be much stronger and faster. SME model crane is either good for inside workshop or outside workshop. The crane’s single leg stand on ground, another side where there is no leg mounting on rail on workshop’s wall.

It is forbidden to work in environment with combustible, explosive or corrosive media.
Working ambient temperature: • -25°C-40°C

Features:

1. Material: All compression structural part of crane’s components chosen material with fine quality and meet regulation. The important material has quality guarantee and inspection report.
2. Welding: In view of important welding seam and stress is more than tension weld of 70% allowance stress, conducting fault detection check and take out 5% weld length by ultrasonic test. Inspection report provided to user.
3. Wire rope hoist: smaller size but better performance. Less noise and outstanding mechanical design.
4. Motor: Drive motor must use China Top Brand: Jiangte Motor. Manufacturer have good achievement used and provided detailed and actual parameter prove that it is good performance product. Insulation class greater than or equal to F; Protective class greater than or equal to IP54.
5. Electric system: Inverter from famous brand ABB can make lifting and traveling in any speed you want specifically for your work.
6. Control panel: 3 ways are optional based on budget or need: Cabin with joystick panel, wireless control panel or pendent control panel.
7. Painting: All steel is treated by sand blasting before doing paintings. There are 3 layers of paintings. The bottom layer is zinc painting to prevent from rusting. The color of top surface should be average.
8. Limit switch for safety: mechanical limit switch: overload limit, height limit, rail end stop limit for traveling. Electric protection: short circuit protection, lose phase protection, low-voltage protection, power failure protection, over current protection.

Other configuration user can choose:

1)Single or double speed of chain hoists other kinds of hoists.

2)Fixing wireless remote control to realize the remote control.

3)Using transducer for travelling or traversing crane to realize step speed or stepless speed change.

4)It should be explained when using in the open-air environment, in order to fix windproof & rainproof devices.

5)The other feasible configuration user propose.

Other Features:

1) Reasonable structure

2) Favorable performance

3) Smooth starting and stopping

4) Safe and reliable traveling

5) Low noise, commodious cabin and good view

6) Convenient maintenance, excellent exchangeability for parts and components

7) Saves electricity

Paramaters of semi-gantry crane