Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Bridge Cranes

Overhead Crane, Rich Experience with Competive Price., Easy to installation and operation., Sturdy, durable, easy to operate. - details see: https://www.machineto.com/2-5t-overhead-crane-10195660

Overhead Crane

YUNLIRONG is one of the well known manufacturers of clean room Cranes. We can supply the Crane with the loading weight up to 100 tons according to customer’s special requirement. The Overhead Crane is frequently used in various industrial environments. The basic structure is composed by a set of trusses and a trolley. The trusses include the parallel saddle and the above movable beam. And the trolley is to carry the main hanging machine to move on the beam. The rail of the Overhead Crane is connected with the working site.

The operation is based on safety. Hand-held operator is mechanical interlocked. The circuit control is also electrical interlocked. There is no complicated installation only easy, convenient and safe assembly. The service life can reach to more than 20 years under proper operation and maintenance.

Customer’s own special inquiry is highly welcome. We can design and plan the most economical and suitable specifications for you.

Safety Device

Both the end of horizontal and vertical rail are equipped with limit switch and baffle to avoid the dropping of the main engine.

The internal friction clutch of the hanging machine can lead to the motor idling when over weight hanging and prevent the machine body and load chain from damage.

The upper and lower limit switches will be immediately prompted to stall the motor when over weight lift. Also, there is overheating protection device to protect the motor from overheating and burning.

The emergency stop button will make the whole system power failure and will be restarted manually.

Steel Frame Material

SS400 & SS41steel with spray painting and sandblasting treatment. (SUS304 is available for customer’s choice)

We have our won sandblasting plant, the blasting grade is 2-1/2 and can remove the oil substance, rust, impurities on the steel, also strengthen the basic painting on the steel.

The basic painting is using epoxy anti-rust paint to avoid corrosion.

The surface painting is using clean room grade Epoxy paint to reduce static electricity, can resist high temperature, anti-rust, resist wind and rain.

The customer can choose the painting material.

Operation under high temperature

Heat resistance during high temperature or from high temperature back to normal temperature.

Temperature(°C)	Load reduction (%)
100~200°C	Should reduce 10%
200~300°C	Should reduce 25%
300~350°C	Should reduce 35%
350~400°C	Should reduce 40%
Above 400°C	Stop operation

Please advise key information
1. Lifting Capacity?
2. Single girder or double girder?
3. Lifting height?
4. The Span (center distance between two rails)
5. Power supply: Is 380V/50Hz/3phase acceptable or not?
6. Travel distance ?