Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Wood Crusher

Hammer mill, 1.ce certification, 2.high products, 3.hot sale in europe - details see: https://www.machineto.com/1t-capacity-wood-hammer-mill-for-farm-using-10350911

wood Hammer mill for farm using

Brief introduction

The hammer mill also named hammer crusher, and crushes materials by the collision between the high-speed hammer and materials. The hammer crusher is used to crush mid-hardness and weak corrosive materials, whose compressive strength is under 100 Mpa, and water ratio is less than 15%. Hammer mill possesses qualities of simple structure, large reduction ratio, and high-efficiency. Both Dry and Wet Process are available.

Features
This crusher is applicable for both dry and wet crushing. Hammer mill is widely used for medium or fine crushing for medium hard and brittle materials by departments of mine, cement, coal, building material, metallurgy, chemical industry, road construction, gas chemical industry and thermal power generation, etc. Coal gangue, coke, slag, limestone, phosphate rock, salt, whiting, gypsum stains, alum, brick and tile, etc. can be crushed by this equipment. The compression strength of the materials shall not exceed 100MPa, while the moisture content shall be lower than 15%.

Advantages of Hammer Mill Machine:

• Lower power consumption cost
• simple and reasonable design
• leasy operation
• wide processing range
• low price.

Technical Parameters

Model	Power kw	Capacity kg/h	Weight kg
HM-I	4	100-300	250/300
HM-II	7.5	400-500	350/400
HM-III	11	500-600	400/450
HM-VI	18.5	700-800	490/560
HM-V	22	1000	510/580